Manual Harman Kardon AVR 165 (page 10 of 42) (English)

502592

Zoom out

Zoom in

1/42

AVR 1650/AVR 165

Introduction to Home Theater

and Place Your Speakers

Introduction to Home Theater

This introductory section will help you to familiarize yourself with some basic concepts

unique to multichannel surround-sound AVRs, which will make it easier for you to set

up and operate your AVR.

Typical Home Theater System

A home theater typically includes an audio/video receiver (AVR), which controls the system

and supplies ampliﬁcation for the loudspeakers; a disc player; a source component for

television broadcasts (cable box, satellite dish AVR, HDTV tuner or antenna connected to

the TV); a TV or video display; and multiple loudspeakers.

Multichannel Audio

The main beneﬁt of a home theater system is its ability to produce “surround sound.”

Surround sound uses multiple speakers and ampliﬁer channels to immerse you in the

audio/video presentation for a dramatically increased sense of realism.

Your AVR can have up to ﬁve main speakers connected directly to it, plus a subwoofer.

Each main speaker is powered by its own ampliﬁer channel inside the AVR. A system

with more than two speakers is called a multichannel system. The different main speaker

types in a home theater system are:

Front Left and Right: s The front left and right speakers are used as in a 2-channel

system. In many surround-sound modes, these speakers are secondary, while the

main action, especially dialogue, is reproduced by the center speaker.

Center: s When you are watching movies and television programs, the center speaker

reproduces most of the dialogue and other soundtrack information that occurs on the

screen, anchoring it with the picture. When you are listening to a musical program, the

center speaker helps to create a seamless front soundstage, creating a more realistic

“you-are-there” listening experience.

Surround Left and Right: s The surround left and right speakers produce ambient

sounds that help create a realistic and immersive surround-sound environment. They

also help recreate directional sound effects such as aircraft ﬂyovers.

Many people expect the surround speakers to play as loudly as the front speakers.

Although you will calibrate all of the speakers in your system to sound equally loud at

the listening position, most artists use the surround speakers for ambient effects only,

and they create their programs to steer relatively little sound to these speakers.

Subwoofer: s A subwoofer is designed to play only the lowest frequencies (the deep

bass). It augments smaller, limited-range main speakers that are usually used for

the other channels. Many digital-format programs, such as movies recorded in Dolby

Digital, contain a low-frequency effects (LFE) channel that is directed to the subwoofer.

The LFE channel packs the punch of a rumbling train or airplane, or the power of an

explosion, adding realism and excitement to your home theater. Some people use two

subwoofers for additional power and for even distribution of the sound.

Surround Modes

There are different theories as to the best way to present surround sound and to distribute

the individual channel information to the surround-sound system’s speakers. A variety

of algorithms have been developed in an effort to recreate the way we hear sounds in

the real world, resulting in a rich variety of options. Several companies have developed

different surround-sound technologies, all of which can be accurately reproduced by

your AVR:

Dolby Laboratories: s Dolby TrueHD, Dolby Digital Plus, Dolby Digital, Dolby Digital EX,

Dolby Pro Logic II.

DTS: s DTS-HD

™

High Resolution Audio, DTS-HD Master Audio

™

, DTS, DTS 96/24

™

HARMAN International: s Logic 7, HARMAN virtual speaker, HARMAN headphone.

Stereo Modes: s 2-channel stereo and 5-channel stereo.

Appendix Table A9, on page 31, contains detailed explanations of the different surround-

sound options available on your AVR. Digital surround-sound modes, such as Dolby

Digital and DTS systems, are available only with specially encoded programs, such

as those available via HDTV, DVD and Blu-ray Disc media and digital cable or satellite

television. Other surround modes may be used with digital and analog signals to create

a different surround presentation or to use a different number of speakers. Surround-

mode selection depends upon the number of speakers in your system, the programs you

are watching or listening to, and your personal tastes.

Place Your Speakers

Determine the locations for your system’s speakers according to their manufacturer’s

directions and the layout of your listening room. Use the illustration below as a guide for

5.1-channel systems.

To create the most realistic surround-sound environment possible, you should place

your speakers in a circle with the listening position at its center. You should angle each

speaker so it directly faces the listening position. Use the diagram below as a guide.

FL FR

SL SR

SUB

Placing the Left, Center and Right Speakers

Place the center speaker either on top of, below or mounted on the wall above or below

the TV or video-display screen. Place the front left and right speakers along the circle,

about 30 degrees from the center speaker and angled toward the listener.

Place the front left, front right and center speakers at the same height, preferably at

about the same height as the listener’s ears. The center speaker should be no more than

2 feet (0.6m) above or below the left/right speakers. If you’re using only two speakers

with your AVR, place them in the front left and front right positions.

Placing the Surround Speakers

You should place the left and right surround speakers approximately 110 degrees from

the center speaker, slightly behind and angled toward the listener. Alternatively, you can

place them behind the listener, with each surround speaker facing the opposite-side

front speaker. You should place the surround speakers 2 feet – 6 feet (0.6m – 1.8m)

higher than the listener’s ears.

NOTE: Your AVR will sound its best when the same model or brand of

loudspeaker is used for all positions.

Placing the Subwoofer

Because a room’s shape and volume can have a dramatic effect on a subwoofer’s

performance, it is best to experiment with placement so that you will ﬁnd the location

that produces the best results in your particular listening room. With that in mind, these

rules will help you get started:

Placing the subwoofer next to a wall generally will increase the amount of bass in s

the room.

Placing the subwoofer in a corner generally will maximize the amount of bass in the s

room.

In many rooms, placing the subwoofer along the same plane as the left and right s

speakers can produce the best integration between the sound of the subwoofer and

that of the left and right speakers.

In some rooms, the best performance could even result from placing the subwoofer s

behind the listening position.

A good way to determine the best location for the subwoofer is by temporarily placing

it in the listening position and playing music with strong bass content. Move around

to various locations in the room while the system is playing (putting your ears where

the subwoofer would be placed), and listen until you ﬁnd the location where the bass

performance is best. Place the subwoofer in that location.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 165 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 165

Harman Kardon AVR 165 User Manual - German - 42 pages

Harman Kardon AVR 165 User Manual - Dutch - 42 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 165 Manual

Product: