Manual Harman Kardon AVR 110 (page 28 of 44) (English)

502582

Zoom out

Zoom in

1/44

28 PROGRAMMING THE REMOTE

Programming the Remote

Macro Programming

Macros enable you to easily repeat frequently

used combinations of commands with the press

of a single button on the AVR 110’s remote con-

trol. Once programmed, a macro will send out

up to 19 different remote codes in a predeter-

mined sequential order enabling you to auto-

mate the process of turning on your system,

changing devices, or other common tasks. The

AVR 110’s remote can store up to five separate

macro command sequences: one that is

associated with the

Power On button a, and

four more that are accessed by pressing the

Macro buttons v.

1. Press the

Mute button and the

Macro button v to be programmed or

the

Power On button a at the same

time. Note that an

Input Selector e will

light red, and the

Program Indicator c

will flash amber.

2. Enter the steps for the macro sequence by

pressing the button for the actual command

step. Although the macro may contain up to

19 steps, each button press, including those

used to change devices, counts as a step.

The

Program Indicator c will flash

green to confirm each button press as you

enter commands.

NOTE: While entering commands for Power

On/Off of any device during a macro sequence,

press the

Mute button . DO NOT press the

actual Power button.

3. When all the steps have been entered,

press the

Sleep button i to enter the

commands. The red light under the

Input

Selectors

ef will blink and then

turn off.

Example: To program the Macro 1 button

so that it turns on the AVR 110,TV and a

Cable Box, follow these steps:

• Press the

Macro 1 v and Mute

buttons at the same time and then release

them.

• Note that the

Program Indicator c

will flash amber.

• Press the

AVR Selector f.

• Press the

Mute button to store the

AVR 110’s power on command.

• Press the

VID 2 Input Selector button

e to indicate the next command is for

“TV Power On.”

• Press the

Mute button to store the

TV Power On Command.

• Press the

VID 3 Input Selector button

e to indicate the next command is for

“Cable Power On.”

• Press the

Mute button to store the

Cable Power On command.

• Press the

Sleep/Channel Up button i

to complete the process and store the

macro sequence.

After following these steps, each time you

press the

Macro 1 button v, the remote

will send the Power On/Off command.

Erasing Macro Commands

To remove the commands that have been pro-

grammed into one of the Macro buttons, follow

these steps:

1. Press the

Mute button and the

Macro button v that contains the com-

mands you wish to erase.

2. Note that the

Program Indicator c will

flash amber, and the LED under the

AVR

Selector

f will turn red.

3.Within ten seconds, press the

Surround

Mode Selector/Channel Down

button j.

4.The red LED under the

AVR Selector f

will go out, and the Program Indicator

c will turn green and flash three times

before it goes out.

5.When the

Program Indicator c goes

out, the Macro has been erased.

Programmed Device Functions

Once the AVR 110’s remote has been pro-

grammed for the codes of other devices, press

the appropriate

Input Selector e to change

the remote from controlling the AVR 110 to con-

trolling the additional product.When you press

any one of the selectors, it will briefly flash in red

to indicate that you have changed the device

being controlled.

When operating a device other than the

AVR 110, the controls may not correspond

exactly to the function printed on the remote

or button. Some commands, such as the volume

control, are the same as they are with the

AVR 110. Other buttons will change their

function so that they correspond to a secondary

label on the remote. For example, the Sleep

and Surround mode selector buttons also func-

tion as the Channel Up and Channel Down

110

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 110 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 110 Manual

Product: