807621

Hapro HP 8580 Innergize Manual

5
Zoom out
Zoom in
Previous page
1/56
Next page
Please bear in mind that the fragrance level depends on a number of factors, such as the
following:
- Habituation may cause fragrances to be perceived less or not at all, but this is normal.
- When you lie on your belly, the fragrance is less noticeable than when you lie on your back.
- Airows in the room where you use the appliance may also aect the fragrance level.
- Your personal condition may also inuence the degree to which you perceive the
fragrance.
Storage
1 Let the appliance cool down for 15 minutes before you put it in transport position and
store it.
2 Store the protective goggles in the storage compartment between the two
lamps. (Fig. 17)
3 Make sure the cord does not get stuck between parts of the appliance when you put the
appliance in transport position.
4 Turn the appliance away from the bed or sofa and make sure there is enough space
around the appliance to collapse it.
5 Press the two release buttons in the recesses of the control panel and slide the control
panel down the stand as far as it goes. (Fig. 18)
6 Turn the lamp unit in the direction of the arrow. (Fig. 19)
You hear a click when the lamp unit locks in vertical position.
7 Pull the stand slightly backwards and then press the dual push button. Lower the stand
slowly until the lamp unit rests on the oor between the legs. (Fig. 20)
8 Wind the cord and fasten it with the Velcro cord wrap strip. (Fig. 21)
You can store the appliance in a wardrobe or under a bed.
Replacement
Tanning lamps
Always have the tanning lamps and starters replaced by a service centre authorised by VDL
Hapro. Only they have the knowledge and skills required for this job and the original spare
parts for appliance.
The light that the tanning lamps emit becomes less bright in time (i.e. after a few years in case
of normal use). When this happens, you notice a decrease in the tanning capacity of the
appliance.
- After 750 operating hours, the tanning capacity of the lamps has decreased so much that
replacement of the tanning lamps is advisable.
- The appliance has a counter that records the operating hours of the tanning lamps. After
750 operating hours, an appears on the display to indicate that replacement of the
tanning lamps is advisable.
Note: Of course, you can choose to postpone replacement for a while by setting a longer
tanning time.
Viewing the operating hours of the tanning lamps
1 Set the time to 00 and press the repeat button ( ) to make the operating hours
appear on the display. The maximum number of hours that can be displayed is 999. The
number of hours is displayed for ten seconds.
ENGLISH 7
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hapro HP 8580 Innergize at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hapro HP 8580 Innergize in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 0.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info