Manual Hanseatic WQP12-7713I (page 62 of 70) (English, German)

711498

Zoom out

Zoom in

1/70

Page EN-26 Installation, connection and initial commissioning

(d)

5. Remove the protective films from the

side end profiles (d).

6. Affix the end profiles to the left and right

edges of the dishwasher. This will pre-

vent a crack being visible between the

dishwasher and the adjacent kitchen

cupboards.

7. Push the dishwasher into the recess.

DOWN

(17)

8. To position the dishwasher so that it is

level, the two front adjustable feet (17)

and the back adjustable foot of the appli-

ance can be adjusted by up to 50 mm.

– The front feet are equipped with slots.

Insert a screwdriver into one of the slots

and turn the feet to the height required.

– You can adjust the height of the rear adjust-

able foot with the centre adjusting screw.

Use a Phillips-tip screwdriver for this.

9. Check the alignment with a spirit level.

10. Make sure the top edge of the dishwash-

er is level with the bottom edge of the

worktop to prevent it from tipping forward

when you open the door.

(f)

(i)

(e) (k)

11. Screw the dishwasher to the kitchen

unit.

a) If you have granite worktops, re-

move the internal side cover caps (e)

and screw the dishwasher to the ad-

jacent kitchen cupboards.

Re-cover the screws (k) with the cover

caps.

b) For all other worktops, screw the

mounting bracket (f) to the work sur-

face until it is fixed.

Mounting the front panel

You can mount a stainless steel front panel

on the dishwasher or one that matches your

kitchen. The front panel must not exceed a

weight of 7 kg.

1. Lay the supplied drilling template on the

reverse side of the front panel in such a

way that the drilling template and the front

panel are flush at the top.

2. Transfer the drill holes from the drill tem-

plate to the front panel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP12-7713I in the language / languages: English, German as an attachment in your email.

The manual is 5,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hanseatic WQP12-7713I Manual

Product: