711834
36
Zoom out
Zoom in
Previous page
1/48
Next page
Materials required for assembly
Page 13
8. Carefully attach the exhaust hood to the
hangers (7) using the two outer fixing
screws.
9. Screw in two fixing screws and washers
into the inner wall plugs and tighten.
[
(3)
(1)
(4)
10. Tighten outer fixing screws. The exhaust
hood is now mounted to the wall.
11. Only for exhaust air operation: Place
the check valve (3)on top of the exhaust
hood (1) and screw tight (4) using four
plate screws.
This step is omitted if the appliance is
used in circulation air operation.
12. If the exhaust hood is being installed be-
neath a cupboard: mark the air outlet for
the exhaust air hose (2) on the bottom of
the cabinet and saw the opening into the
cabinet. To do this
13. drill a hole inside the circle using a wood
drill;
14. cut out the circle from there using a jig-
saw;
15. smooth the edges with sandpaper.
(6)
(2)
(3)
16. Attach the exhaust hose (2) with the
153 mm diameter opening (see marking
on the exhaust air hose) to the exhaust
opening (6)of the check (3) valve.
17. Attach the exhaust air hose opening with
a diameter of 150 mm (see marking on
the hose) to the wall/ceiling outlet.
18. Establish a connection with the power
supply.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic SY-103D1-E3-C25-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic SY-103D1-E3-C25-900 in the language / languages: English, German as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info