713574
57
Zoom out
Zoom in
Previous page
1/64
Next page
Commissioning the appliance
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
Do not operate or continue to oper-
ate the appliance if
it shows visible signs of damage,
for example, the connection cable
is defective,
it starts smoking or there is a smell
of burning,
it makes unfamiliar noises.
In such cases, remove the mains plug
from the socket or unscrew/isolate the
fuse and contact our service depart-
ment (see “Service” on pageEN-28).
Never connect to a timer or a sepa-
rate remote-controlled system for dis-
tance monitoring and control.
If the mains plug is no longer acces-
sible after installation, an all-pole dis-
connecting device complying with
overvoltage category III must be
connected to the house wiring with a
contact gap of at least 3 mm; this in-
cludes fuses, circuit breakers and con-
tactors.
Do not kink or pinch the mains cable
or lay it over sharp edges. This can re-
sult in a break in the cable.
When installing the appliance, en-
sure that the mains cable does not
become pinched or damaged.
Do not put portable multi sockets or
mains adapters at the rear of the ap-
pliance.
CAUTION
Fire hazard!
Improper handling of the appliance
can lead to fi re and property damage.
Only connect the appliance to a
properly installed and earthed elec-
tric socket. Do not connect to a mul-
ti-socket extension cable or a mul-
ti-socket plug.
NOTICE
Risk of damage!
If the refrigerating appliance has been
transported horizontally, lubricant from
the compressor may make its way into
the cooling circuit.
Allow the appliance to stand upright
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to fl ow
back into the compressor.
Insert the mains plug into an easily acces-
sible and properly installed socket (220-
240 V~ / 50 Hz).
The compressor starts to work, the refrig-
erant flows through the pipes and a quiet
humming sound can be heard.
You will find all important information
about operation from page EN-12.
Start-up
Page EN-25
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HGS17260A2NF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HGS17260A2NF in the language / languages: English, German as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info