711934
39
Zoom out
Zoom in
Previous page
1/52
Next page
HGS 14355A2, HGS 14355A2S
Changing the door hinges
13
Preparation
4. Use flat-nose pliers to carefully pull the temperature con-
troller out of its holder. If necessary, put a cloth between the
temperature controller and the flat-nose pliers to prevent
scratches. Lever out the two sides of the cover on the front
slightly and lift the cover up.
M
E
D
MA
X
MIN
5. Unscrew the hinge plate’s three fixing screws and the two
individual screws on the opposite side. To do this, use an 8
mm spanner or a cross-head screwdriver. Remove the hinge
plate.
6. Screw the hinge plate as well as the two individual screws
back onto the respective opposite side.
9. Tip the freezer backwards (maximum 45°) so that you can
also move the lower door hinge.
10. Unscrew both front screw feet.
11. Unscrew the lower hinge plate. To do this, use an 8 mm
spanner or a cross-head screwdriver.
12. Move the hinge pin to the opposite side of the hinge plate. To
loosen and tighten the nut, use a 10 mm spanner or the un-
derside of a screw foot.
7. Place the cover back on the freezer. Push down on both
sides (left and right) of the front of the cover until you hear
it click into place. Reattach the temperature controller to its
designated holder.
MED
MAX
MIN
8. Screw the two screws tightly back onto the cover. To do this,
use a cross-head screwdriver. Reattach both screw covers.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HGS 14355A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HGS 14355A2 in the language / languages: English, German as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info