711934
38
Zoom out
Zoom in
Previous page
1/52
Next page
HGS 14355A2, HGS 14355A2S
Changing the door hinges
12
Preparation
Positioning the freezer
The freezer must stand on a level, solid surface. For the best result,
check the position of the appliance with a spirit level. When you
open the door, the freezer should not move. You can balance out
unevenness in the surface with the two front adjusting feet.
1. Close the freezer door.
2. Tilt the freezer backwards slightly.
3. Screw/unscrew the screw feet as required.
4. Stand the freezer straight up once again and check its align-
ment with a spirit level.
5. Repeat these steps until the freezer is level.
Changing the door hinges
WARNING
Risk of electric shock!
To change the door hinges, you will need to remove
the cover from the freezer. Live parts can become ac-
cessible by doing so.
Disconnect the mains plug before starting to change
the door hinges.
You can
change
the side that the door opens to. The door hinges are
on the right upon delivery. Since some manual skills are required to
carry out this change, please read through the steps of the procedure
beforehand. You need the following tools:
Cross-head screwdriver
8 and 10 mm open-end wrench or socket spanner
Flat-nose pliers
1. Pull out the blind plug from the top of the door.
2. Use a screwdriver to loosen both screw covers on the top of
the cover.
3. Unscrew the two screws (on the left and right) from the top of
the cover. To do this, use a cross-head screwdriver.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HGS 14355A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HGS 14355A2 in the language / languages: English, German as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info