495093
10
Zoom out
Zoom in
Previous page
1/41
Next page
8
Advanced Features
Hammond XPK-100 Quick Features Guide
ADVANCED FEATURES
Your Hammond XPK-100 has a number of special functions, called Advanced Features, that allow you
to further enhance your playing and create exactly the musical performance you want. A list of the
Advanced Features can be affixed to the XPK-100 itself to make them easier to remember.
The above picture shows the decal which can be affixed to the XPK-100. Notice that the Advanced
Features appear in two groups.
Advanced Features E00 through E06 control the internal MIDI data of the XPK-100.
Advanced Features E07 through E12 are features which send MIDI Controller data out to
a connected MIDI device. This data falls into two categories:
1. NPRN (Non-Registered Parameter Data) which activates Touch Tabs on a
Hammond Drawbar Keyboard or functions on the Hammond XM-1 Drawbar
Module;
2. Universal Controller data to which most MIDI devices will respond in a
predictable way, such as Controller #64 for Sustain, etc.
The following is a brief explanation of each of the Advanced Feature functions.
E00 PK MIDI Channel - Allows you to select the MIDI Channel on which the XPK-100 will transmit.
(See page 10.)
E01 Transpose - Allows you to raise or lower the pitch by half-steps sp as to play in one key but sound
in another. (See page 12.)
E02 Octave - Allows you to select the octave in which the XPK-100 will play. (See page 14.)
E03 Poly/Mono Mode - Allows you to select either Polyphonic (two or more notes) or Monophonic
(only one note) Mode. (See page 16.)
E04 PK Hold ON/OFF - Allows you to select whether you want the pedal notes to continuously play.
(See page 17.)
E05 PK Volume - Allows you to control the maximum volume or loudness of the pedal notes. (See
page 18.)
E06 Fixed Vel. Value - Allows you to transmit a fixed Velocity number from 0 through 127 from the
XPK-100 to a connected MIDI device. (See page 19.)
E07 Control Channel - Allows you to select the MIDI Channel on which Controller information will
be transmitted. (See page 20.)
E08 CONTROL Sw. Function - Allows you to select the function for the CONTROL Switch. (See
page 22.)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XPK-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XPK-100 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info