495093
9
Zoom out
Zoom in
Previous page
1/41
Next page
7
Information Center Display
Hammond XPK-100 Quick Features Guide
Current Parameter Current Value
EDIT Mode
If you touch the PLAY/EDIT Switch once from any of the PLAY screens, the Information Center Display
will alternate between two messages as shown below:
You are now in EDIT Mode.
You can now use the PRESET/EDIT Switches to select from among the different Advanced Features.
Use the Switch to scroll up through the Advanced Feature selections.
Use the Switch to scroll down through the Advanced Feature selections.
The Advanced Features are explained in full starting on page 8.
Ë ALL RESET
You can insure that the XPK-100 contains the factory-default settings for all parameters before applying
power to it.
NOTE: Doing the following procedure will erase all parameters, settings and registrations, returning the XPK-100 to the
original Hammond factory default settings. To ensure that important data is saved, save your information to a MIDI Data
recorder before doing this procedure.
1. Plug the AC power supply that came with your XPK-100 into an AC outlet.
2. On the XPK-100, Press and Hold the two PRESET/EDIT Switches with two fingers of one
hand.
3. While holding down the two PRESET/EDIT Switches, insert the plug from the AC power
supply into the jack on the back of the XPK-100 with the other hand. The Information
Center Display will flash the following for approximately 1 second:
The above is an abbreviation for, “ALL Initialize.”
When the above message stops displaying, the Information Center Display will show the
following:
5. Release the two PRESET/EDIT Switches. All parameters are now reset.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XPK-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XPK-100 in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info