495079
80
Zoom out
Zoom in
Previous page
1/90
Next page
*#1 :/Owner’s Manual
Appendix80
System Exclusive Message
Memory Dump Mode Setting Exclusive Message
1.Each Packet Full Parameters Reset
F0
System Exclusive
F0
System Exclusive
55
SUZUKI ID
55
SUZUKI ID
00
Device ID
10
Device ID for DT1
10 Model ID MSB 42 Model ID for DT1
16
Model ID LSB
12
Command: DT1
11 Command: Data Packet 40 Address MSB
[TYPE]
Data Type
00
Address
02h= Setup Dump 7F Address LSB
[PNH]
Packet Number MSB
7F
Reset
[PNL] Packet Number LSB 42 Check Sum
[DATA]
64 Bytes Data
F7
End of Exclusive
128 Bytes nibblized ASCII When this device receives this message, it is reset to
ex: 7Eh = 37h, 45h the initial status of Full Parameter, and gets ready
[CHD]
Check Digit for receiving the music data for this device
Lower 7 bits of XOR [DATA] correctly.
F7 End of Exclusive It takes about 50ms to process this message.
Take an interval before the next message.
2.Acknowledge
F0
System Exclusive
55 SUZUKI ID
00
Device ID
10 Model ID MSB
16
Model ID LSB
14 Command: Acknowledge
[AK]
Result: 00h=OK
05h=Check Digit Error
06h=Receive Protected
[PNH]
Packet Number MSB
[PNL] Packet Number LSB
F7 End of Exclusive
3.Hand shake communication
Master Slave
Packet 0 ->
<- Acknowledge 0
Packet 1 ->
<- Acknowledge 1
.....
This device will wait for 20ms if no acknowledge
is received and transmit the next data of the
packet number. (One Way Transfer)
NRPN Switch
F0 System Exclusive
55
SUZUKI ID
00
Device ID
10
Model ID MSB
16
Model ID LSB
02 Command: NRPN Sw.
[DATA]
00h=Off, 7Fh=On
F7
End Of Exclusive
When this device receives this message, switch
Tx&Rx NRPN in Control channel.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info