495079
78
Zoom out
Zoom in
Previous page
1/90
Next page
*#1 :/Owner’s Manual
Appendix78
MIDI Information
Data Entry
Status 2nd Byte 3rd Byte
Bn 06 mm (MSB)
Bn 26 ll (LSB)
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
mm,ll=Value for the Parameter designated by RPN/NRPN.
NRPN MSB/LSB
Status 2nd Byte 3rd Byte
Bn 63 mm (MSB)
Bn 62 ll (LSB)
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
mm=Upper Byte of the Parameter Number designated by NRPN[MSB].
ll=Lower Byte of same[MSB].
The value set by NRPN is not reset even if "Program Change",
"Reset All controllers", etc. are received.
NRPN- "Non Registered Parameter Number"
The expansive range named NRPN is provided in the Control Change,
which function is specific on each equipment and not defined in the
MIDI Standard.
When you use it, designate the parameter to control, by giving NRPN MSB
and NRPN LSB (cc#98 and 99), and then set the value of the designated
parameter by the Data Entry MSB(cc#6).
Once the NRPN parameter is designated, all the data entry received into
the same channel after that is regarded as the change of the value of the
parameter. To avoid any mis-operation, we suggest you to set RPN Null
(RPN = 7F 7F), after setting the necessary parameter value.
On this sound module you can change the voice parameter by using
NRPN.
[Channel Voice Message]
Note Off
Status 2nd Byte 3rd Byte
8n kk vv or
9n kk 00
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
kk=Note Number: 00 - 7F(0 - 127)
vv=Velocity(disregard): 00 - 7F(0 - 127)
Note On
Status 2nd Byte 3rd Byte
9n kk vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
kk=Note Number: 00 - 7F(0 - 127)
vv=Velocity: 00 - 7F(0 - 127)
Control Change
Program Change messages etc. are received.
Modulation
Status 2nd Byte 3rd Byte
Bn 01 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Modulation Value: 00 - 7F
Expression
Status 2nd Byte 3rd Byte
Bn 0B vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Expression Value: 00 - 7F(0 - 127)
Default Value = 7F(127)
Spring Shock
Status 2nd Byte 3rd Byte
Bn 30 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Velocity:
Leslie On
Status 2nd Byte 3rd Byte
Bn 31 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Control Value: 00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
Leslie Brake
Status 2nd Byte 3rd Byte
Bn 32 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Control Value: 00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
Leslie Fast
Status 2nd Byte 3rd Byte
Bn 33 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Control Value: 00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
Hold 1
Status 2nd Byte 3rd Byte
Bn 40 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Control Value: 00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
The value set by the Control Change is not reset even when
Pitch Bend Chan
g
e
Status 2nd Byte 3rd Byte
En ll mm
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
mm=Upper Byte
ll=Lower Byte
00 00(-8192) - 40 00(0) - 7F 7F(8191)
[Channel Mode messages]
All Sounds Off
Status 2nd Byte 3rd Byte
Bn 78 00
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
When this message is received, all currently-sounding notes on the
corresponding channel will be turned off immediately.
Reset All Controllers
Status 2nd Byte 3rd Byte
Bn 79 00
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
When this message is received, the following controllers will be set to
their reset values.
Controller Reset Value
Pitch Bend Change ±0 (Center)
Modulation 0 (off)
Expression 127 (Maximum)
Hold 1 0 (off)
RPN unset; previously set data will not change
NRPN unset; previously set data will not change
All Notes Off
Status 2nd Byte 3rd Byte
Bn 7B 00
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
When All Notes Off is received, all notes on the corresponding channel
will be turned off. However if Hold 1 is On, the sound will be continued
until these are turned off.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info