495079
63
Zoom out
Zoom in
Previous page
1/90
Next page
Setting The Parameters
63
5. HORN LEVEL
12. BASS LEVEL
The Volume of each Rotor is set. The setting range is 0 to -12dB.
6. RISE TIME - HORN
13. RISE TIME - BASS
Here the time is set for the Rotor to reach the Fast Speed when you go from Slow
or Brake to Fast. The setting range for the Horn Rotor is 0.2 - 5.0s, and that for
the Bass Rotor is 0.5 - 12.5s.
7. FALL TIME - HORN
14. FALL TIME - BASS
Here the Time is set for the Rotor to reach the Slow speed when you go from Fast
to Slow Speed. The setting range for the Horn Rotor is 0.2 - 5.0s, and that for the
Bass Rotor is 0.5 - 12.5s.
8. BRAKE TIME - HORN
15. BRAKE TIME - BASS
Here the time is set for the Rotor to stop when you go from Fast state to Brake.
The setting range for the Horn Rotor is 0.2 - 5.0s, and that for the Bass Rotor is
0.5 - 12.5s.
9. HORN CHARACTER
Here the tone of the Horn Rotor is set.
“FLAT” is a flat tone, and the others are the tones with “peaky” characteristic.
16. MIC - ANGLE
This is the parameter to set for the LOCATIONS of the two Microphones for the
imaginary Leslie Speaker.
The ANGLE decides the distance between the two mikes.
The setting range is 0 - 180 degrees. The farther away, the more stereophonic
feeling it gives.
17. MIC - DISTANCE
This is the parameter to set for the DISTANCE between the imaginary Leslie
Speaker and the Microphones.
The setting range is 0.3 - 2.7m. The more the value increases, the less effective it
gets.
NOTE: When you operate the parameters 2 - 17, the setting range will be lost after
the power is switched off, if you do not do the recording operation of the
next page.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info