495079

Hammond XM-2 Manual

61
Zoom out
Zoom in
Previous page
1/90
Next page
Setting The Parameters
61
PERCUSS (PERCUSSion)
In this mode, you can set the parameter of the PERCUSSION sound.
To locate this mode:
1. Touch the [MENU/EXIT] button and display the MENU, then select PAGE B by the [PAGE]
button, choose “PERCUSS” by using the [PARAM] button and touch [ENTER] button.
2. Another option is to hold down the [PERC.] button for a certain length of time.
1. LEVEL - SOFT
2. LEVEL - NORMAL
These are used for setting the Level of Percussion. SOFT is the
level when the VOL (P. 36) is SFT, and NORMAL is the level
when the VOL is NOR.
3. DECAY - SLOW
4. DECAY - FAST
These are used for setting the speed of the Decay of the Percus-
sion.
SLOW is the speed when the DCY (P. 36) is SLW, and FAST is
the speed when the DCY button is FST.
The setting range is 1 - 9 and C. The larger the value gets, the
longer gets the Decay Time. At C, no decay (= continuous).
5. KEYBOARD - TOUCH
This is used for setting the method of sound production of the
Percussion.
ON: If you play legato, the notes including and after the sec-
ond note do not sound. (The envelope will not be re-
set.)
OF: Even if you play legato, all the notes produce sounds
like the piano.
6. KEYBOARD - VELOCITY
Controls the Volume of Percussion with Key Velocity.
ON: The faster a key is pressed, the louder the sound.
OF: It sounds at a certain volume regardless of how fast a
key is pressed.
7. KEYBOARD - KEY TRACK
Changes the Percussion Volume by the note.
ON: The higher notes reduce the volume.
OF: It sounds at a certain volume regardless of notes.
8. DRAWBAR - 1' CANCEL
This mutes the 1' of the UPPER part while using PERCUSSION.
ON: Mute
OF: Does not mute.
9. DRAWBAR - LEVEL
Decreases the volume of the UPPER Drawbars while using PER-
CUSSION.
-3dB:Decreases the volume
0dB:Does not decrease the volume
NOTE: This parameter works only when the VOL is SFT.
NOTE: The parameters in those modes are all Patch Parameters.
They are recorded to each Patch.
TOUCH
The B-3/C-3 had only one built-in Envelope Generator, and was not
recharged until all the UPPER Manuals were released. This looks like
a drawback, but it had the advantage that the sound did not get loose
when chords were roughly played.
1' CANCEL
The B-3/C-3 had no key contact exclusive for percussion but uses
the 1' contact for percussion. In this module, this is simulated.
DRAWBAR LEVEL
On the B-3/C-3, the Drawbar Volume gets slightly smaller if the Per-
cussion is on. This is simulated in this module.
1 2
3 4
5 6 7
8 9
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XM-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XM-2 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info