495087
103
Zoom out
Zoom in
Previous page
1/112
Next page
*#1 :-Owner’s Manual
Appendix
103
Control number: Upper
50h(80)
Lower
51h(81)
Pedal
52h(82)
Data Map:
Level 16' 5 1/3' 8' 4' 2 2/3' 2' 1 3/5' 1 1/3' 1' 16' 8'
0
00h(0) 09h(9) 12h(18) 1Bh(27) 24h(36) 2Dh(45) 36h(54) 3Fh(63) 48h(72) 00h(0) 09h(9)
1
01h(1) 0Ah(10) 13h(19) 1Ch(28) 25h(37) 2Eh(46) 37h(55) 40h(64) 49h(73) 01h(1) 0Ah(10)
2
02h(2) 0Bh(11) 14h(20) 1Dh(29) 26h(38) 2Fh(47) 38h(56) 41h(65) 4Ah(74) 02h(2) 0Bh(11)
3
03h(3) 0Ch(12) 15h(21) 1Eh(30) 27h(39) 30h(48) 39h(57) 42h(66) 4Bh(75) 03h(3) 0Ch(12)
4
04h(4) 0Dh(13) 16h(22) 1Fh(31) 28h(40) 31h(49) 3Ah(58) 43h(67) 4Ch(76) 04h(4) 0Dh(13)
5
05h(5) 0Eh(14) 17h(23) 20h(32) 29h(41) 32h(50) 3Bh(59) 44h(68) 4Dh(77) 05h(5) 0Eh(14)
6
06h(6) 0Fh(15) 18h(24) 21h(33) 2Ah(42) 33h(51) 3Ch(60) 45h(69) 4Eh(78) 06h(6) 0Fh(15)
7
07h(7) 10h(16) 19h(25) 22h(34) 2Bh(43) 34h(52) 3Dh(61) 46h(70) 4Fh(79) 07h(7) 10h(16)
8
08h(8) 11h(17) 1Ah(26) 23h(35) 2Ch(44) 35h(53) 3Eh(62) 47h(71) 50h(80) 08h(8) 11h(17)
ex: Set Lower 8' to level 7 via MIDI... Bx 51 19 (x=Lower Channel)
PedalUpper/Lower
Drawbar Data List
NRPN MSB/LSB RPN MSB/LSB
Status 2nd Byte 3rd Byte Status 2nd Byte 3rd Byte
Bn 63 mm (MSB) Bn 65 mm (MSB)
Bn 62 ll (LSB) Bn 64 ll (LSB)
n=MIDI Channel Number: 0 - F(Ch.1 - 16) n=MIDI Channel Number: 0 - F(Ch.1 - 16)
mm=Upper Byte of the Parameter Number designated by NRPN[MSB]. mm=Upper Byte of the Parameter Number designated by RPN[MSB].
ll=Lower Byte of same[MSB]. ll=Lower Byte of same[MSB].
The value set by NRPN is not reset even if "Program Change",
The Value set by RPN is not reset by receiving the "Program Change",
"Reset All controllers", etc. are received. "Reset All Controllers", etc.
NRPN- "Non Registered Parameter Number" RPN- "Registered Parameter Number"
The expansive range named NRPN is provided in the Control Change, The expansive range named RPN is provided in the Control Change,
which function is specific on each equipment and not defined in the which function is specific on each equipment and not defined in the
MIDI Standard. MIDI Standard.
When you use it, designate the parameter to control, by giving NRPN MSB When you use it, designate the parameter to control, by giving RPN MSB
and NRPN LSB (cc#98 and 99), and the set the value of the designated
and RRN LSB(cc#101 and 100), and then set the value of the desgnated
parameter by the Data Entry MSB(cc#6). parameter by the Data Entry MSB(cc#6).
Once the NRPN parameter is designated, all the data entry received into Once the RPN parameter is designated, all the data entry received into
the same channel after that is regarded as the change of the value of the
the same channel after that is regarded as the change of the value of the
parameter. To avoid any mis-operation, we suggest you to set RPN Null parameter. To avoide any mis-operation, we suggest you to set RPN Null,
(RPN = 7F 7F), after setting the necessary parameter value. after setting the necessary parameter value.
On this sound module you can change the voice parameter by using
NRPN.
Master Coarse Tuning
Data Entry
RPN MSB RPN LSB
Status 2nd Byte 3rd Byte
00 02 3A - 40 - 46 (-6 - 0 - +6 semitones)
Bn 06 mm (MSB)
This message will sent as Transpose for external zones.
Bn 26 ll (LSB)
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
mm,ll=Value for the Parameter designated by RPN/NRPN.
DATA MSB
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond XK-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond XK-3 in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info