495084
114
Zoom out
Zoom in
Previous page
1/130
Next page
114
*#1 $OM%OM$2OMOwner’s Manual
UTILIZING NEW FUNCTIONS & FEATURES
How to control the leakage sound:
The leakage volume of the whole tone-wheel set currently selected is adjustable by the LEAKAGE Pa-
rameter in the DRAWBAR Function mode. (P. 72 #2)
Adjustment of the leakage interval and or volume per each wheel can be made by using the Custom
Tone-wheel. (P. 92)
How to turn on PEDAL SUSTAIN:
Press [PLAY] and display “P.SUS”, then select “ON” by [VALUE]. The length of sustain effects is
controlled by the SL parameter in the DRAWBAR function mode. (P. 73 #8)
How to record other parameters than drawbars to the preset keys:
The memory/record operation on this organ also enables you to record various parameters along with the
Drawbar registrations. To set the parameter to call when the preset key is selected, set the parameters on
the P. LOAD page in the PRESET function mode. (P. 76)
How to see the actual values of a preset:
In case the physical location of the controller and the actual value do not exactly match when you call a
preset such as the [VIBRATO] tablet, you can display the actual value by operating the controller hold-
ing down the [PLAY] button. (P. 78) The actual Drawbar registration is displayed in PLAY mode.
How to locate each function mode easily?
You can “short-cut” to each function mode by moving some controllers (e.g. tablets, knobs) while press-
ing the [MENU/EXIT] button.
How to adjust the Drawbar settings while playing with the Preset C< - A:
To temporarily adjust the Drawbar settings while you are playing with the preset keys [C<] - [A], operate
Drawbars holding down the [PLAY] button. (P. 52)
Relation between the built-in Leslie effect and the external Leslie speaker:
If no Leslie speaker is connected or headphones are used while a Leslie speaker is connected, the built-
in Leslie effects are added to both (L & R) channels.
If a Leslie speaker is connected, the built-in Leslie effects are added only to the L channel.
How to avoid adding Leslie effects on the Pedal part:
The Pedal Part sound is independently output at the PEDAL OUT jack. The built-in Leslie effects,
Reverb, Tube Buffer do not function at this jack.
By connecting the PEDAL OUT jack and the PA equipment and setting the SYSTEM-PEDAL PART
OUTPUT parameter to “PEDAL”, the manual part and the pedal part are separately output to the Leslie
speaker and the PEDAL OUT jack respectively (P. 96 #1).
How to change the motion of the built-in Leslie effect when the Leslie mode
switch is set at “STOP”.
The default setting of the built-in Leslie effects on this organ is to bypass (thru) when the Leslie mode
switch is set at “STOP”, so you can enjoy the sound engine’s original sound.
To get the effect of the rotor stop of the Leslie speaker at this time, set the STOP mode at “STOP” in the
LESLIE function mode. (P.86 #20)
How to totally cut off the sound when the expression pedal is returned.
The characteristic of the Expression Pedal can be freely changed.
To turn off the sound completely when the Expression Pedal is returned, set all the minimum level, limit
LF, limit HF at “OFF” in the CONTROL function mode. (P. 91 #5, #6, #7)
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond C-3 mk2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond C-3 mk2 in the language / languages: English as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info