655938
16
Zoom out
Zoom in
Previous page
1/25
Next page
15
6.3 Opspannen van de loopband
In de loop der tijd kan de spanning op de loopband afnemen. Dit is
een normaal verschijnsel. Dit kunt u opmerken doordat de
loopband bij het plaatsen van een voet kort stopt. Om dit
probleem op te lossen draait u beide schroeven per keer 1/4 slag
met de klok mee. Herhaal totdat het probleem verholpen is en de
band bij plaatsing van uw voet niet meer stopt. Als de band
onverhoopt niet meer gecentreerd ligt na deze aanpassingen, volg
dan de stappen onder 6.2
.
6.4 Smeren van de loopband
De loopband is in de fabriek al klaargemaakt voor directe
ingebruikname. Smering is dus niet nodig voorafgaand aan uw
eerste training. Als gevolg van wrijving, moet de loopband echter
van tijd tot tijd te worden gesmeerd. Als richtlijn geldt: elke 6
maanden smeren op basis van 3 trainingen per week van 30
minuten en een snelheid van 6 km/h.
Om te controleren over de loopband gesmeerd dient te woden zet
u eerst de loopband uit. U voelt met uw hand onder de loopriem
of deze nog voldoende gesmeerd is. Voelt de rug van de loopriem
droog, smeer deze dan met een siliconen spray.
Werkwijze smeren:
1) Stop de loopband zodanig dat de naat van de loopband zich aan
de bovenzijde bevindt.
2) Til de loopband op en spuit wat siliconenspray tussen het dek
en het midden van de loopband. Begin aan de voorzijde werk
toe naar de achterzijde.
Herhaal dit voor de andere kant.
3) Start de loopband met een snelheid van
1km/h
en loop van
links naar rechts op de loopband zodat de band de
siliconenspray goed kan opnemen.
6.3 Tighten the belt
after longer exercise, the tension of the belt
will
decrease.
It
can be checked
if
you put one foot on the belt and belt
will
stop.
To solve this problem, please turn both screws clockwise for
¼
turns. Please do not turn them more.
If
the belt is running out of
the centre, please adjust it
like
described under
6.2.
6.4 Lubricate the running belt
A good lubricate running deck is
minimizing
the
wearout.
A lubrication before the first training is not necessary. The
lubrication should be done everey 6 month,
if
you do your
exercise 3 times a week for 30 minutes.
For checking the lubrication, please make sure, that
the
treadmill is switched
off.
Put your hand between the belt
and
the deck.
If
you
still
feel some
silicon,
then it is no
need
for lubrication.
If
the backside of the belt feels dry, then it is
necessary
to lubricate the belt.
How to do it:
1) Stop the belt, that the seam is stopped on top side.
2) Lift the belt a little bit and put some silicon between the deck
and the belt in the centre, starting from the front side, ending
at the rear side. Lubricate it again from the other side.
3) Start the treadmill with a speed of
1km/h
and
walk
on
the
treadmill from left to right side, so that the belt can
absorb
the silicon very well.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammer 4326 LR16i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammer 4326 LR16i in the language / languages: English, Dutch as an attachment in your email.

The manual is 5,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hammer 4326 LR16i

Hammer 4326 LR16i User Manual - English, German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info