723779
8
Zoom out
Zoom in
Previous page
1/47
Next page
5
5.2.1 Connecting the transmitter using an optical
signal cable
Note
Switch off the product beforeconnecting aterminal
device to it.
Remove the protective caps from both ends of the
optical signal cable beforeconnection.
Do not bend or crush the cable.
Forplayback using the optical audio input, connect one
end of the optical signal cable (supplied) to the optical
audio input (15) on the transmitter,and connect the
other end to the optical audio output on your terminal
device (e.g. TV set, DVD player).
Then connect an optical signal cable to the optical audio
output of the transmitter (14) and the optical audio input
of the source device (e.g. soundbar,AVreceiver).
5.2.2 Connecting the transmitter using AUX IN
Note
Switch off the product beforeconnecting aterminal
device to it.
Do not bend or crush the cable.
Forplayback via the AUX connection, use an RCAcable
(supplied) to connect the AUX OUT of your picturesource
(e.g. TV set, DVD player) to the AUX IN (17) of the
transmitter.
Then use an RCAcable to connect the transmitter’sAUX
OUT (16) to the AUX IN of the playback source (e.g.
soundbar,ACreceiver).
5.2.3 Receiver
Connect the receiver to the speakers using the two-core
audio cable.
Note
The speaker intended for the left-hand corner of the
room is labelled SPK-L on the back.
The speaker intended for the right-hand corner of the
room is labelled SPK-R on the back.
Right-hand corner
Take the speaker intended for the right-hand corner of
the room and the audio cable coloured redand black.
Connect the red-sheathed audio cable to the positive
pole (red connection) of the speaker and the positive
pole (red connection) of the receiver.
Then connect the black-sheathed audio cable to the
negative pole (black connection) of the speaker and the
negative pole (black connection) of the receiver.
Left-hand corner
Take the speaker intended for the left-hand corner of the
room and the audio cable coloured grey and red.
Connect the red-sheathed audio cable to the positive
pole (red connection) of the speaker and the positive
pole (red connection) of the receiver.
Then connect the grey-sheathed audio cable to the
negative pole (grey connection) of the speaker and the
negative pole (grey connection) of the receiver.
Connect the receiver to aproperly installed and easily
accessible mains socket via apower supply unit (12V /
1.5A).
5.3 Re-connecting the transmitter and receiver
(pairing)
Note
The transmitter and receiver areshipped already
paired.
If the connection between the transmitter and receiver
should be interrupted, you can repeat the pairing process.
To do so, proceed as follows:
1. Press the [POWER] button of the remote control (1)
to turn on the transmitter and receiver.
2. Press and hold the Surround ON/OFF /[Pairing]
button (12) on the back of the transmitter for about
3seconds.
3. Then press and hold the Pairing button (3) on the
back of the receiver for about 3seconds.
4. The pairing process is complete when the status LED
of the transmitter (10) lights up blue.
5.4 Surround mode
Brieypress the Surround ON/OFF /[Pairing] button (12)
on the back of the transmitter to switch between surround
and mono/stereo playback.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama RS100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama RS100 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info