Manual Hama RS100 (page 7 of 47) (English, German, Dutch, French, Polish)

723779

Zoom out

Zoom in

1/47

4. Information and notes before getting started

This product extends your existing audio system with return

channel speakers, allowing you to generate surround

sound with a2.1 channel system.

When you use asource that does not provide an actual

Dolby Surround signal, the kit recalculates the signal to

simulate surround sound.

4.1 Getting started with the remote control

Remove the protruding safety strips from the battery

compartment of the remote control by pulling them out.

The battery has already been inserted so this will render

the remote control ready to use.

4.2 Replacing the battery

• Open the battery compartment cover (9) on the back of

the remote control by sliding the closing tab (8) to the

right and pulling out the battery compartment cover.

• Remove and dispose of any used batteries.

• Insert the new battery (AA). Take careofplacing the

new battery according to the right polarity.(Positive side

upward, negative downward)

• Close the battery compartment. Make surethat the cover

closes easily and tightly.

5. Getting started

• Connect the power cable to aproperly installed and

easily accessible power socket.

• The power supply units aresuitable for mains voltages

between 100 and 240 V, allowing them to be used in

almost any AC power grid. Please note that acountry-

specicadapter may be necessary.

• Youcan nd aselection of compatible products at www.

hama.com.

Note

• Only connect the product to asocket that has been

approved for the device.

• The electrical socket must always be easily accessible.

• When using amult-socket power strip, make sure

that the sum power draw of all the connected devices

does not exceed its maximum throughput rating.

• If you will not be usingthe product for aling period

of time, disconnect it from mains power.

5.1 Positioning in the room

Note

• The housing of the speakers is made of hardplastic.

Avoid subjecting them to direct sunlight, moisture

(in the kitchen or bath), or direct proximity to air

conditioning systems.

• Situate the speakers on alevel, stable surface.

• Alternatively,the speakers may be attached to the

wall using the included wallmounting xtures.

• Older TV sets may generate magnetic interference.

If you experience interference, increase the distance

between the product and the picturesource.

Remove all of the supplied components from the

packaging.

• Set up the transmitter in aplace wherethe LED indicator

and IR sensor point in your direction.

• Place the receiver directly behind you with one speaker

each to the left and right of it.

• The distance between the transmitter and the receiver

should not exceed 10 metres.

Receiver

Sound source Transmitter

5.2 Connecting the cables

Youcan use the analog and digital audio inputs to connect

your terminal device and play its audio signals using the

product. Youcan connect it using a3.5-mm audio minijack

cable, an RCAcable, or an optical signal cable.

Note

• Connections via an optical signal cable areless

susceptible to electrical or magnetic interference than

those using a3.5-mm audio minijack cable.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama RS100 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama RS100 Manual

Product: