Manual Hama EWS170 - 92654 (page 8 of 32) (English, German, Dutch, French, Polish)

607473

Zoom out

Zoom in

1/32

DCF 77 RADIO CONTROLLED CLOCK

The radio-controlled time is calculated by the Cesium Atomic clock of Braunschweig

(ofcial clock of Germany). Then the time is coded and transmitted from Mainingen – near

Frankfurt – via a signal on DCF-77 (77.5 kHz). The transmitting range of the signal is 1500 km,

which means that most of Western and Central Europe is covered by this signal.

Within this range the received time is completely accurate. Once sensor signal(s) are

received, the wave icon will ash to indicate that the receiving unit starts to receive

the DCF radio controlled time signal. Radio Controlled wave icon can indicate 4 levels

of signal status:

Very weak Weak Medium Strong

Once the time signal is received, the wave icon will stay on the LCD, and time and calendar will

automatically be updated.

Note: During the 10-minute time signal reception, all manual settings will be suspended.

If setting is desired, press once [ + ] key to deactivate the reception. You can also press

and hold the same key for 2 seconds to manually activate the reception in normal mode.

SET THE CLOCK & CALENDAR

1. Press & hold [ ] button for 2 seconds to enter clock setting mode.

Flashing 24 hours will appear.

2. Press [ + ] or [ - ] button to switch between 24 hours and 12 hours format,

and then press [ ] button to conrm.

3. The hour digits will ash. Use the [ + ] button to increase by one hour or [ - ] button to

decrease by one hour to your desired hours. Holding down either button will change the

increment rapidly. Press [ ] button to conrm.

4. The minute digits will ash. Use the [ + ] button or [ - ] button to set your desired minutes.

Holding down either button will change the increment rapidly. Press [ ] button to

conrm.

Note: Every change of minute digit will automatically reset the seconds to zero.

5. The year digit will ash and Yr icon appears. Press [ + ] or [ - ] button to set your desired

year. Press [ ] button to conrm.

Note: Year range is from 2000 to 2099.

6. D and M icons will ash. Press [ + ] or [ - ] to select D M (Date Month) or M D (Month Date)

format. Press [ ] button to conrm.

7. Month digits will ash. Press [ + ] or [ - ] button to set your desired month. Press [ ] button

to conrm. Do the same to set Date.

TO SET DAILY ALARM

1. In clock time display mode, press [ ] button twice to display alarm time for 10 seconds.

2. Press [-] button in alarm display mode to arm or disarm the daily alarm.

3. Press and hold [ ] for 2 seconds to enter the alarm setting mode.

4. The hour digit will ash, use [ + ] button to increase by one hour or [ - ] button to decrease by

one hour to your desired hours. Hold down the button will change the increment

rapidly. Press [ ] button to conrm.

5. The minute digits will ash. Use [ + ] button to increase by one minute or [ - ] button to

decrease by one minute to your desired minutes. Hold down the button will change the

increment rapidly. Press [ ] button to conrm and nish the setting.

HOW TO SET TEMPERATURE ALERT

1. Press [ ] key to your desire Hi or Lo temperature limit for designated IN or REMOTE

thermo at the desirable channel;

2. Press and hold the [ ] key for 2 seconds, the corresponding display digits start blinking;

3. Use the [ + ] & [ - ] keys to change for your desired setting;

4. Press [ ] key to conrm setting and exit the setting mode. (“ ” or “ ” icon appears to

indicate the lower or upper alert is armed)

5. Auto-exit the temperature alert display and returns to current temperature display mode

after 5 seconds. (Hi-Lo temperature limit icon disappears; leaving “ ” or “ ” icon to

indicator alert is armed.)

6. To disarm the temperature alert – go to the desired temperature alert display mode, press [

- ] key once to disable the alert, the “ ” or “ ” icon disappears.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama EWS170 - 92654 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama EWS170 - 92654 Manual

Product: