723745
27
Zoom out
Zoom in
Previous page
1/33
Next page
22
PIN setup
Select your desired network. (Indicated by the prex
"[WPS...]")
In the WPS menu, choose the PIN option and conrm
your selection by pressing [POWER/VOLUME/ENTER/
NAVIGATE] (9).
The tuner generates an 8-digit code, which must be
entered into the web or user interface of your router or
access point.
Consult the corresponding handbook for details on
conguring the router or access point.
Skip WPS / Pre-Shared Key (PSK) conguration
Choose the item "[Skip WPS]" to proceed to key entry.
On networks that do not support WPS, you will go
directly to key entry.
In the input screen, enter the whole key and then conrm
with the OK button.
If the key was entered correctly, the tuner connects to
the access point and establishes the Internet/network
connection.
Note
Often the Pre-Shared Key is printed on the back of the
router or access point.
When entering the key, take notice of capitalisation.
Open network / unsecured network
Note
We
r
ecommend against establishing unsecur
ed
connections and advise you to always protect your
network against unauthorised access.
If you plan to use an open network, you just have to
select the network from the list of available networks
and conrm. The tuner then connects immediately
with the access point.
16.2.3 Manual configuration of network connection
– wireless (WLAN)
To manually congure a network connection, proceed as
follows:
Press [
] (1) to go to the system settings.
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Internet settings" menu item.
Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Manual settings" menu item.
Manual conguration wireless (WLAN) – DHCP
enable
Select the option "Wireless".
Selection the option "DHCP enable".
In the input screen, enter the whole SSID (network name)
and then conrm with the OK button.
Now choose the security standard used by the network.
This can be found in the conguration options of your
router or access point.
Depending on the encryption used, you may need
to enter the network key before the connection is
established.
Manual conguration wireless (WLAN) – DHCP
disable
This method corresponds to conguration with an active
DHCP server (manual conguration wireless (WLAN)
- DHCP enabled), however you must also enter the
network information such as the IP address, subnet mask,
gateway address and DNS (primary and secondary).
Find this information in the web interface of your router
or access point, or if this information is already correctly
entered, you can conrm the entry. The tuner now attempts
to establish the connection.
16.2.4 View settings
This is where you will nd all of the key information about
all network connections that the tuner is currently using, or
which have been set up, e.g.: MAC address, WLAN region,
DHCP enable / disable, SSID, IP address, subnet mask,
gateway address, DNS (primary/secondary), etc.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama DIT1010BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama DIT1010BT in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama DIT1010BT

Hama DIT1010BT User Manual - German - 33 pages

Hama DIT1010BT User Manual - Dutch - 33 pages

Hama DIT1010BT User Manual - French - 33 pages

Hama DIT1010BT Quick start guide - All languages - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info