723745
26
Zoom out
Zoom in
Previous page
1/33
Next page
21
To set the equaliser, proceed as follows:
[ ]
System settings
Equaliser
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to select
one of the pre-congured proles.
To create your own equaliser prole, choose the My EQ
settingoption.
This takes you to the bass, treble and loudness
settings (volume amplication).
To change a value, press [POWER/VOLUME/ENTER/
NAVIGATE] (9) on the relevant selection and change
the values by turning [POWER/VOLUME/ENTER/
NAVIGATE] (9) left or right. If playback is already
started when you modify these settings, you can hear the
changes in the audio immediately.
Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9) again.
Once you have made all the settings, press [
] (4) on
the tuner and conrm that the settings are to be saved
by pressing [POWER/VOLUME/ENTER/NAVIGATE] (9).
To use the new prole, choose the My EQ option.
16.2 Internet settings
16.2.1 Network wizard – Configuration of Internet
connection / Search
The network wizard helps you set up a connection
between the tuner and the Internet. More methods of
conguration and detailed information are amplied
subsequently.
You can start the Network wizard as follows:
Press [
] (1) to go to the system settings.
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Internet settings" menu item.
Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Network wizard" menu item.
When the wizard is started, the tuner searches for WLAN
(WiFi) connections and then shows a list of the available
networks.
Turn [POWER/VOLUME/ENTER/NAVIGATE] (9) to
switch between the networks found. At the bottom of
the list are options to restart the search ("[Rescan]") or
congure the connection yourself ("[Manual cong]").
If your network is not found or the SSID (Service Set
Identication, that is, the name of your network) is not
shown, the network may be hidden or out of range. In
this case, try manual conguration.
16.2.2 Wireless network connection (WLAN)
Depending on the network, there are a number of ways to
connect to it.
Networks that support connection via WPS (Wi-Fi Protected
Setup) are identied in the list with the prex "[WPS...]".
Other connections are either open networks or connections
protected with a PSK, or Pre-Shared-Key.
WPS / PSK / open network connection
WPS allows simple and nevertheless protected connection
of the tuner to the network. Two options are available for
this purpose:
The connection can be set up by means of PBC, or Push-
Button Conguration, or by the PIN procedure, in which
the web interface of your router prompts you to enter a
randomly generated
sequence of numbers.
PBC setup
Select your desired network. (Indicated by the prex
"[WPS...]")
In the WPS menu, then select the "Push Button"
option and conrm the selection by pressing [POWER/
VOLUME/ENTER/NAVIGATE] (9).
Press the WPS button on your router or current access
point. This can often be done using the web interface,
as well.
Consult the operating instructions of your router or
access point for details.
Once the procedure has also been initiated on the router
/ AP, the tuner should connect with the access and the
network connection should be available.
Alternatively, PBC setup can be initiated from the tuner's
Internet settings:
Press [
] (1) to go to the system settings.
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Internet settings" menu item.
Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "PBC Wlan setup" menu item.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama DIT1010BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama DIT1010BT in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama DIT1010BT

Hama DIT1010BT User Manual - German - 33 pages

Hama DIT1010BT User Manual - Dutch - 33 pages

Hama DIT1010BT User Manual - French - 33 pages

Hama DIT1010BT Quick start guide - All languages - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info