723745
16
Zoom out
Zoom in
Previous page
1/33
Next page
11
Date/ Time
12/24-hour format
Auto update
Update from DAB/ FM
If automatic time and date adjustment is
activated, the device receives time and date
information from the station over the FM/DAB/
DAB+ radio network. This is the best way to
ensure that the clock will run accurately and the
alarm will trigger at the correct time, even after
power outages.
Update from Internet
Choose this option to set the time and date
automatically via the Internet connection. Also
set the time zone of your current location and, if
desired, turn (ON) automatic adjustment between
summer time and winter time.
No update
The time and date (DD-MM-YYYY) must be set
manually; no automatic calibration takes place.
Network wizard – Conguration of network
connection
Note – Reference to a different part of
these operating instructions
Because this chapter is extensive, please follow the
directions in section 16.2.1 Network wizard –
Conguration of Internet connection / Search
Once the network wizard has nished,the setup wizard
is nished as well. The display shows a message to this
effect.
Conrm completion by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9), to go to the main menu.
6. Connections
Note
Connections that are established by means of an
optical signal cable are less affected by electrical
or magnetic interference than connections that are
established via a 3.5 mm audio cable.
6.1 Connection via Optical-OUT
You can connect your loudspeaker to the tuner via the
digital audio output, for example, and play its audio
signals via the loudspeaker.
Note
Switch the tuner off before connecting a device to it.
Before connection, remove the safety caps from both
ends of the optical signal cable.
Do not bend or crush the cable.
For playback via the optical audio connection, connect
an optical signal cable to the tuner's optical audio output
(12) and the loudspeaker's optical audio input.
Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to
switch on the tuner.
The tuner's audio signal is now output via the
loudspeaker.
6.2 Connection via LINE OUT
You can connect your loudspeaker to the tuner via the
analogue audio output, for example, and play its audio
signals via the loudspeaker.
Note
Switch the tuner off before connecting a device to it.
Do not bend or crush the cable.
For playback via the analogue audio connection, connect
a 3.5 mm RCA cable to the tuner's analogue audio
output (11) and the loudspeaker's analogue audio input.
Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to
switch on the tuner.
The tuner's audio signal is now output via the
loudspeaker.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama DIT1010BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama DIT1010BT in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama DIT1010BT

Hama DIT1010BT User Manual - German - 33 pages

Hama DIT1010BT User Manual - Dutch - 33 pages

Hama DIT1010BT User Manual - French - 33 pages

Hama DIT1010BT Quick start guide - All languages - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info