723745
14
Zoom out
Zoom in
Previous page
1/33
Next page
9
5.1 General notes on use
5.1.1 Switch On/Off / Standby
Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to
switch on the tuner.
Press and hold [POWER/VOLUME/ENTER/NAVIGATE]
(9) for 3 seconds to switch the tuner off (standby).
To completely switch off the device, disconnect it from
the power supply.
5.1.2 Navigation and controls
After pressing a shortcut button, navigate through the
menu items using.
Select the individual menu items by turning [POWER/
VOLUME/ENTER/NAVIGATE] (9).
Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
5.1.3 Volume adjustment / mute
Turn the volume up (right) or down (left) by turning
[POWER/VOLUME/ENTER/NAVIGATE] (9) accordingly.
Press [
] on the remote control to mute the tuner.
Press [ ] again on the remote control to reset the
volume to the value before it was muted.
5.2 Connecting and starting up
Warning
Only operate the product from a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
Disconnect the product from the power supply using
the On/Off switch – if this is not available, unplug the
power cord from the socket.
If using a multi-socket power strip, make sure that the
total power consumption of all connected devices does
not exceed the power strip's maximum throughput
rating.
If you will not be using the product for a prolonged
period, disconnect it from mains power.
Connect the power supply to the mains connection (1) on
the back of the tuner.
Connect the network cable to a properly installed and
easily accessible network socket.
Wait until the tuner has initialised fully.
Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to
switch on the tuner.
Note – switching on for the rst time
The Setup Wizard starts up automatically when the
device is turned on for the rst time.
The default used language is English.
You can skip the Wizard and start it up again later in
German.
Once the product has been connected to mains power,
initialisation takes place. The tuner is started.
To assist you with the rst-time setup of the tuner, a Setup
Wizard is provided.
5.3 General notes on use
Notes on use
These operating instructions always relate to operation
using the controls on the device. Functions that are
only usable by app or remote control are explained
separately.
For information on the buttons on the remote control
and their functions (
) that correspond to the control
buttons on the device, please see the Controls and
displays.
[OK] and the navigation button on the remote
control correspond to pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
The navigation button on the remote control
corresponds to [
] (4) on the front of the tuner.
The navigation buttons / correspond to turning
[POWER/VOLUME/ENTER/NAVIGATE] (9) to the left
and right on the front of the tuner.
When a selection among menu items is to be made
(such as YES or NO), the one currently selected has a
light-coloured background ll.
In menus offering a variety of different options (such
as Equalizer, Update, and so on), the currently selected
option is marked with #.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama DIT1010BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama DIT1010BT in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama DIT1010BT

Hama DIT1010BT User Manual - German - 33 pages

Hama DIT1010BT User Manual - Dutch - 33 pages

Hama DIT1010BT User Manual - French - 33 pages

Hama DIT1010BT Quick start guide - All languages - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info