Manual Hama BC300 - 92660 (page 9 of 37) (English, German, Dutch, French, Italian, Spanish)

607479

Zoom out

Zoom in

1/37

18 19

2. And connect them with the units.

3. Supply Power : DC 6V

Note:

• User can also install 3 alkaline AAA batteries instead of the supplied

rechargeable batteries.

• Or directly operated by the supplied adaptors.

Testing Before First Time Usage

Test the Transmitter emission and the Receiver reception.

• Place Transmitter and Receiver in room where you intend to use it.

• Set both Transmitter and Receiver to the same channel (01 or 02) by switching

the OFF/CH1/CH2 channel switch. Selected channel will be shown on the

top right corner of the LCD screen.

• Set both Transmitter and Receiver to the same pilot tone when using. By

selecting a Dip switch(ON/DIP/1/2/3/4) at the battery compartment for different

pilot tones to ensure privacy. There are 16 combinations of pilot tone for use

selection. (Please refer to the PILOT TONES COMBINATION TABLE)

NOTE:

It is important that with both units the switch settings are the same because if

this is not the case the transmitter and the receiver will not be able to connect to

one another.

Transmitter emission:

1. By using the SENSITIVITY knob you can turn in the sensitivity of the

transmitter individually, according to your wishes.

2. As soon as the transmitter transmits a signal the “Baby calling ” icon will be

ﬂ ashed on the LCD screen. During the entire transmission the LCD backlight

is activated.

3. If the transmitter hears hardly any noise, it automatically switches to the

energy saving mode. “Baby sleeping” icon shown on the LCD screen and the

LCD backlight will automatically be turned off.

Receiver reception:

1. By turning the volume knob from right side the receiver will be turned on. After

turning it on the LCD display is activated and indicates you that the unit is

ready for operation. The channel being used will be displayed in the top right

of the LCD screen. By turning the volume more you can adjust is as you wish.

2. If the unit receives a signal, the LCD backlight lights up automatically during

the entire transmission and the “Baby calling” icon ﬂ ashes.

3. A few seconds after the unit receives no more signals, the receiver is

automatically switched to energy saving mode. The “Baby sleeping” icon will

be shown and the LCD backlight will automatically turned off.

Set Up & Use

IMPORTANT! Test sound reception before use and whenever location of

transmitter is changed. (Refer to Testing Before First Time Usage)

1. Transmitter detects sound levels within a range of 1 to 2 meters (3 to 6.5 feet)

for NORM setting.

2. Place transmitter in the same room with child. Point microphone directly

toward child location, such as crib or playing area.

3. Set both Receiver and Transmitter to the same channel (01 or 02) and pilot

tone.

4. Push transmitter SENSITIVITY switch to a desired position.

5. Adjust different detecting sound level sensitivity by switching the SENSITIVITY

switch.

6. The receiver will go to energy saving mode and “Baby sleeping” icon shown

when it doesn‘t detect sound from the surrounding area.

7. Place receiver where you stay and hear it.

8. Set the receiver to the same channel and pilot tone with the transmitter by

switching OFF/CH1/CH2 switch and Dip switch.

9. Rotate VOLUME knob to adjust volume.

10.Turning off by slide the OFF/CH1/CH2 switch to “OFF” position.

Note:

• Position the Transmitter at least 1 meter away from the baby for transmission.

• Plug the adaptor into the nearest standard household electrical outlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama BC300 - 92660 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama BC300 - 92660 Manual

Product: