683782
27
Zoom out
Zoom in
Previous page
1/38
Next page
59
Electrical equipment
The electrical equipment of the Hako-
matic B 910 uses a tension of 24 V.
Three types of battery systems may
be used (refer to ”Battery systems”,
page 39).
Towing
If the Hakomatic has to be towed e.g.
due to discharged batteries or faulty
drive assembly, proceed as follows:
Remove the front right and left
bolts and the deflector rollers
Pull the belt through the lower
holes for the bolts
Note: Tow the Hakomatic at a speed
of max. 2 km/h and for a short distan-
ce only. Otherwise the drive motor
may be damaged. If the ma-chine is
pushed too fast, the drive assembly
may block.
59
Electrical equipment
The electrical equipment of the Hako-
matic B 910 uses a tension of 24 V.
Three types of battery systems may
be used (refer to ”Battery systems”,
page 39).
Towing
If the Hakomatic has to be towed e.g.
due to discharged batteries or faulty
drive assembly, proceed as follows:
Remove the front right and left
bolts and the deflector rollers
Pull the belt through the lower
holes for the bolts
Note: Tow the Hakomatic at a speed
of max. 2 km/h and for a short distan-
ce only. Otherwise the drive motor
may be damaged. If the ma-chine is
pushed too fast, the drive assembly
may block.
59
Electrical equipment
The electrical equipment of the Hako-
matic B 910 uses a tension of 24 V.
Three types of battery systems may
be used (refer to ”Battery systems”,
page 39).
Towing
If the Hakomatic has to be towed e.g.
due to discharged batteries or faulty
drive assembly, proceed as follows:
Remove the front right and left
bolts and the deflector rollers
Pull the belt through the lower
holes for the bolts
Note: Tow the Hakomatic at a speed
of max. 2 km/h and for a short distan-
ce only. Otherwise the drive motor
may be damaged. If the ma-chine is
pushed too fast, the drive assembly
may block.
59
Electrical equipment
The electrical equipment of the Hako-
matic B 910 uses a tension of 24 V.
Three types of battery systems may
be used (refer to ”Battery systems”,
page 39).
Towing
If the Hakomatic has to be towed e.g.
due to discharged batteries or faulty
drive assembly, proceed as follows:
Remove the front right and left
bolts and the deflector rollers
Pull the belt through the lower
holes for the bolts
Note: Tow the Hakomatic at a speed
of max. 2 km/h and for a short distan-
ce only. Otherwise the drive motor
may be damaged. If the ma-chine is
pushed too fast, the drive assembly
may block.
Scrub-
master B140 R uses a tension of 24 V.
Scrubmaster has to be towed e.g.
Scrubmaster at a speed
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B140R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B140R in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info