683782

Hako Scrubmaster B140R Manual

26
Zoom out
Zoom in
Previous page
1/38
Next page
58
Height Adjustment
The height adjustment is set to 3 mm
at the factory. If streaks are produced,
despite an optimum angle adjustment,
the clearance between the rollers and
floor must be adjusted by changing
the number of washers on the holder.
In the case of very smooth floors, e.g.
finished floors, PVC, linoleum, etc.
Number of washers = 2. This corre-
sponds to a clearance of approx. 2
mm.
In the case of very uneven floors, e.g.
poorly laid tiles (water does not run
off) Number of washers = 4. This cor-
responds to a clearance of approx. 4
mm.
The Squeegee 110 cm is
equipped with two additio-
nal rollers which are adju-
sted at the factory to a di-
stance of 10 mm to the floor by
means of spacers.
Fig. 3
3 mm
2 mm
4 mm
58
Height Adjustment
The height adjustment is set to 3 mm
at the factory. If streaks are produced,
despite an optimum angle adjustment,
the clearance between the rollers and
floor must be adjusted by changing
the number of washers on the holder.
In the case of very smooth floors, e.g.
finished floors, PVC, linoleum, etc.
Number of washers = 2. This corre-
sponds to a clearance of approx. 2
mm.
In the case of very uneven floors, e.g.
poorly laid tiles (water does not run
off) Number of washers = 4. This cor-
responds to a clearance of approx. 4
mm.
The Squeegee 110 cm is
equipped with two additio-
nal rollers which are adju-
sted at the factory to a di-
stance of 10 mm to the floor by
means of spacers.
Fig. 3
3 mm
2 mm
4 mm
58
Height Adjustment
The height adjustment is set to 3 mm
at the factory. If streaks are produced,
despite an optimum angle adjustment,
the clearance between the rollers and
floor must be adjusted by changing
the number of washers on the holder.
In the case of very smooth floors, e.g.
finished floors, PVC, linoleum, etc.
Number of washers = 2. This corre-
sponds to a clearance of approx. 2
mm.
In the case of very uneven floors, e.g.
poorly laid tiles (water does not run
off) Number of washers = 4. This cor-
responds to a clearance of approx. 4
mm.
The Squeegee 110 cm is
equipped with two additio-
nal rollers which are adju-
sted at the factory to a di-
stance of 10 mm to the floor by
means of spacers.
Fig. 3
3 mm
2 mm
4 mm
58
Height Adjustment
The height adjustment is set to 3 mm
at the factory. If streaks are produced,
despite an optimum angle adjustment,
the clearance between the rollers and
floor must be adjusted by changing
the number of washers on the holder.
In the case of very smooth floors, e.g.
finished floors, PVC, linoleum, etc.
Number of washers = 2. This corre-
sponds to a clearance of approx. 2
mm.
In the case of very uneven floors, e.g.
poorly laid tiles (water does not run
off) Number of washers = 4. This cor-
responds to a clearance of approx. 4
mm.
The Squeegee 110 cm is
equipped with two additio-
nal rollers which are adju-
sted at the factory to a di-
stance of 10 mm to the floor by
means of spacers.
Fig. 3
3 mm
2 mm
4 mm
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B140R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B140R in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info