Manual Hako Scrubmaster B140R (page 8 of 38) (English)

683782

Zoom out

Zoom in

1/38

Installation of battery

Battery system A and B

How to install the tray-type batteries

24 V / 320 Ah or 24 V / 280 Ah

Open the doors at the left and right

side

Tilt the driver seat upwards to the

right

Dismount brace (1) at the left side

(4 screws)

Remove plug of the seat switch line

Dismount brace (5) including seat at

the right side and set aside (do not

remove belt)

Swivel device plug

Place tray battery (4) by means of a

lifting unit or a fork-lift truck into the

machine from the left side.

Note: Only use lifting and trans-

porting facilities e.g. lifting tackle

according to VDI 3616. Cells, con-

nectors or cables must not be

damaged by usage of hooks.

Check the coding of battery, device

and charger plugs and modify as

required according to the instruc-

tions on page 41 and 42.

Link battery and device plugs (pay

attention to tight fit)

 Mount left brace (1) and brace (5)

including driver seat

 Connect the line to seat switch.

 Close side doors and tilt the driver

seat downwards

Proceed to dismounting in inverse

order

Battery system C and D

 Open the doors at the left and right

side

 Tilt the driver seat upwards to the

right

 Place the batteries 6 V/180 Ah or

6 V/240 Ah into the battery com-

partment and connect the poles

with the battery lines

 Check the coding of battery, device

and charger plugs and modify as

required according to the instruc-

tions on page 41

 Close side doors and tilt the driver

seat downwards

Proceed to dismounting in inverse

order.

1 Brace

2 Device plug

3 Battery plug

4 Tray-type battery

5 Brace including driver seat

Installation of battery

Battery system A and B

How to install the tray-type batteries

24 V / 320 Ah or 24 V / 280 Ah

Open the doors at the left and right

side

Tilt the driver seat upwards to the

right

Dismount brace (1) at the left side

(4 screws)

Remove plug of the seat switch line

Dismount brace (5) including seat at

the right side and set aside (do not

remove belt)

Swivel device plug

Place tray battery (4) by means of a

lifting unit or a fork-lift truck into the

machine from the left side.

Note: Only use lifting and trans-

porting facilities e.g. lifting tackle

according to VDI 3616. Cells, con-

nectors or cables must not be

damaged by usage of hooks.

Check the coding of battery, device

and charger plugs and modify as

required according to the instruc-

tions on page 41 and 42.

Link battery and device plugs (pay

attention to tight fit)

 Mount left brace (1) and brace (5)

including driver seat

 Connect the line to seat switch.

 Close side doors and tilt the driver

seat downwards

Proceed to dismounting in inverse

order

Battery system C and D

 Open the doors at the left and right

side

 Tilt the driver seat upwards to the

right

 Place the batteries 6 V/180 Ah or

6 V/240 Ah into the battery com-

partment and connect the poles

with the battery lines

 Check the coding of battery, device

and charger plugs and modify as

required according to the instruc-

tions on page 41

 Close side doors and tilt the driver

seat downwards

Proceed to dismounting in inverse

order.

1 Brace

2 Device plug

3 Battery plug

4 Tray-type battery

5 Brace including driver seat

Installation of battery

Battery system A and B

How to install the tray-type batteries

24 V / 320 Ah or 24 V / 280 Ah

Open the doors at the left and right

side

Tilt the driver seat upwards to the

right

Dismount brace (1) at the left side

(4 screws)

Remove plug of the seat switch line

Dismount brace (5) including seat at

the right side and set aside (do not

remove belt)

Swivel device plug

Place tray battery (4) by means of a

lifting unit or a fork-lift truck into the

machine from the left side.

Note: Only use lifting and trans-

porting facilities e.g. lifting tackle

according to VDI 3616. Cells, con-

nectors or cables must not be

damaged by usage of hooks.

Check the coding of battery, device

and charger plugs and modify as

required according to the instruc-

tions on page 41 and 42.

Link battery and device plugs (pay

attention to tight fit)

 Mount left brace (1) and brace (5)

including driver seat

 Connect the line to seat switch.

 Close side doors and tilt the driver

seat downwards

Proceed to dismounting in inverse

order

Battery system C and D

 Open the doors at the left and right

side

 Tilt the driver seat upwards to the

right

 Place the batteries 6 V/180 Ah or

6 V/240 Ah into the battery com-

partment and connect the poles

with the battery lines

 Check the coding of battery, device

and charger plugs and modify as

required according to the instruc-

tions on page 41

 Close side doors and tilt the driver

seat downwards

Proceed to dismounting in inverse

order.

1 Brace

2 Device plug

3 Battery plug

4 Tray-type battery

5 Brace including driver seat

Installation of battery

Battery system A and B

How to install the tray-type batteries

24 V / 320 Ah or 24 V / 280 Ah

Open the doors at the left and right

side

Tilt the driver seat upwards to the

right

Dismount brace (1) at the left side

(4 screws)

Remove plug of the seat switch line

Dismount brace (5) including seat at

the right side and set aside (do not

remove belt)

Swivel device plug

Place tray battery (4) by means of a

lifting unit or a fork-lift truck into the

machine from the left side.

Note: Only use lifting and trans-

porting facilities e.g. lifting tackle

according to VDI 3616. Cells, con-

nectors or cables must not be

damaged by usage of hooks.

Check the coding of battery, device

and charger plugs and modify as

required according to the instruc-

tions on page 41 and 42.

Link battery and device plugs (pay

attention to tight fit)

 Mount left brace (1) and brace (5)

including driver seat

 Connect the line to seat switch.

 Close side doors and tilt the driver

seat downwards

Proceed to dismounting in inverse

order

Battery system C and D

 Open the doors at the left and right

side

 Tilt the driver seat upwards to the

right

 Place the batteries 6 V/180 Ah or

6 V/240 Ah into the battery com-

partment and connect the poles

with the battery lines

 Check the coding of battery, device

and charger plugs and modify as

required according to the instruc-

tions on page 41

 Close side doors and tilt the driver

seat downwards

Proceed to dismounting in inverse

order.

1 Brace

2 Device plug

3 Battery plug

4 Tray-type battery

5 Brace including driver seat

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B140R in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hako Scrubmaster B140R Manual

Product: