683781
7
Zoom out
Zoom in
Previous page
1/32
Next page
EN
EN-5
1.2.b - Operator position
While using the machine, the operator is po-
sition at the rear of the machine with his/her
hands on the handle.
1.2.c - Protective clothing
- Use protective clothing as indicated in the
standards in force in the country in which
the machine is used.
1.2.d - General warnings before
use
- Before using the machine, check that the
fixed safety guards (covers) are always
correctly secured in position.
1.2.e - General warnings while using
the machine
- If the machine makes strange noises, stop
it immediately and identify the cause.
- Do NOT abandon the machine on sur-
faces which slope by more than 2%.
- While using the machine, do not knock
into shelving or cupboards.
- It is forbidden to use the machine out-
doors or on public roads.
- If possible, use the machine in environ-
ments where no persons are present;
in the present of unauthorised persons,
warn them to move away before using
the machine.
- Do not use the machine in environments
with the presence of corrosive or salty
substances.
- Do not use the machine in explosive en-
vironments (ATEX).
- It is not advisable to use an adaptor, mul-
tiple sockets, or an extension cord.
- If the electrical cord of this appliance is
damaged, it must be replaced by an Au-
thorized Customer Service Centre.
1.2.f - General warnings about the
batteries
- Use appropriate personal protection
equipment to avoid contact with the skin
(see standards in force in the country in
which the machine is used).
- Do not inhale the vapour: it is danger-
ous.
- It is forbidden to smoke and/or use na-
ked flames within 2 metres of the battery
during charging, in the charging area and
while the battery is cooling after charg-
ing.
- Report any liquid leaking from the
battery:
leaks are dangerous and highly pollut-
ing.
- Use only sealed GEL or AGM batteries.
- Batteries must be replaced only by quali-
fied personnel.
1.2.g - General warnings during
maintenance
- Disconnect the batteries before perform-
ing maintenance and repair operations.
- Do not rest tools and metal objects on the
batteries; danger of short circuits.
- Do not use aggressive detergents, acid,
lye etc. during cleaning and washing and
take particular care with electrical parts.
- Do not wash the machine with direct or
pressurised jets of water.
- When the machine must be lifted for any
maintenance operations, it is necessary
to work safely by placing fixed supports
underneath it.
- Contact an authorised support centre
for repairs and request ORIGINAL spare
parts only.
1.2.h - General warnings in the
event of a fire
- In the event of a fire, use approved pow-
der extinguishers only; do NOT use water
to put out the fire.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B12 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info