711005
12
Zoom out
Zoom in
Previous page
1/30
Next page
23
Installation
22
Troubleshooting
Drainage failure. Pump filter is blocked. Clean pump filter.
Drain hose end is higher than Make sure that drain hose
100 cm above floor level. is properly installed.
Drain hose is blocked. Unblock drain hose.
Strong vibration Machine load is not correct.. Adapt amount of laundry.
while spinning. Washing machine is located Make sure that washing
on an uneven surface or is machine is on an even sur-
not levelled. face and levelled.
Not all transportation bolts Remove all transportation
have been removed. bolts.
Operation stops Water or electric failure. Check power
.ylppus retaw dna gnitelpmoc erofeb
wash cycle.
Operation stops No displayed “error code“? Activate display - see “.display“.
for a period of time. Programme performs Touch Start/Pauseto resume.
soaking cycle?
Programme break down. If it seems appropriate
.noitarepo lecnac
Excessive foam Detergent is not a appropriate. Check detergent
.snoitadnemmocer ro/dna murd stao
detergent drawer. Excessive use of detergent. Reduce amount of detergent
Automatic adjustment Washing programme This is normal and doesn‘t
of washing time. duration will be adjusted. affect functionality.
Spinning fails. Unbalance of laundry. Check machine load and
gninnips a nur dna yrdnual
.niaga emmargorp
Preparation
Remove all packaging material including polystyrene base.
While opening the package, water drops may be seen on
plastic bag and porthole. This normal phenomenon results
from water tests in the factory.
Dismantle the transportation bolts
The transportation bolts are designed for clamping anti-
vibration components inside the appliance during transpor-
tation.
1. Remove bolts on the rear side and take out
plasticspacers
from inner side of the machine.
2. Fill left holes with blanking plugs.
Adjusting the feet
Adjust all feets to achieve a complete level position.This will
minimize vibrations and noise during use. It will also
reduce wear and tear. We recommend to use a spirit level
for adjustment. Floor should be as stable and flat as possible.
12


Need help? Post your question in this forum.

Forumrules
1

Forum

haier-hw100-bd14756

Reset search

  • Hi, I have a Haier Haier HW80-BD14756 and the smart dosing no longer comes on by default. Is there something I can do to activate this. Thankyou Submitted on 15-4-2023 at 05:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HW100-BD14756 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HW100-BD14756 in the language / languages: English as an attachment in your email.

The manual is 6,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haier HW100-BD14756

Haier HW100-BD14756 User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info