811877
2
Zoom out
Zoom in
Previous page
1/12
Next page
Item No.: 0621850109031
V13 H06
2
1 PRELIMINARY REMARKS
Please read the assembly and operating instructions of your fireplace insert before these installation
instructions.
The following are additional parts of these installation instructions:
“Equipment sheet complete”,
installation instructions of the fire protection insulating set if applicable.
When unpacking the concrete elements, possible irregularities (cracks or joints) can be detected if
applicable, these should be filled with the enclosed adhesive.
2 PREREQUISITES
The load-carrying capacity of the floor must always be clarified before installing your fireplace kit.
The total weight of the complete fireplace kit (fireplace with refractory lining and the artificial stone
lining) can amount to approximately 370 to roughly 420 kg depending on the model. With wooden
beam ceilings it is essential to consult a structural engineer.
Important: Observe the regulation of the fire protection authorities and the national construction
regulations applicable at the place of installation when installing your fireplace kit: In particular,
flammable walls (e.g. wooden walls) or supporting walls made of reinforced concrete must be
protected from excessive heating. To screen flammable or structurally sensitive components from
impermissible exposure to heat, a fire protection insulating set is available as accessory to your
fireplace kit. This set includes several screen panels. We recommend attaching this fire protection
insulating set also with non-flammable walls.
3 TOOLS
For the installation of the artificial stone lining you will require the following tools:
Water level
rubber hammer
open-end wrench size
13mm
Steel square 90 o
Pencil
Paint roller
Trowel
Sponge
4 MATERIAL
Paint
Plaster if required
Water
Acrylic
5 KIT INSTALLATION
1. Carefully unpack the artificial stone lining including accessories. Check your kit for
completeness using the enclosed parts list. Sort the parts in accordance with the installation
sequence (see parts list text and illustration).
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn Roma II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn Roma II in the language / languages: English as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn Roma II

Haas-Sohn Roma II User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info