564790
10
Zoom out
Zoom in
Previous page
1/34
Next page
10
6.2..7 Fault screen
Quit
15:00 24.01.2004
Fault screen
Thermosensor flue gas
Interruption
Functions of the keys:
Left: Key inactive
Middle top: Key inactive
Middle bottom: Display Info screen 1
Right: Clear the fault on the display
6.3. Setting the language
With all devices, the language factory setting is set to
“German”.
If you would like to set another language, proceed as
follows:
In the main menu, place the cursor on “Language”.
Press the right “Select” key.
Select the desired language with the two middle keys.
Then press the right “Save” key.
If you would like to quit this screen without saving, press
the left “Back” key.
After saving, switch off the master switch and switch it
back on. It is only then that the texts will be displayed in
the language just selected.
6.4. Description Heating profile
Setting range from 80 to 600
Factory setting: 80
The value to be set depends on the size of the room that
is to be heated.
Guideline values:
Room size 20m² - Value 80
Room 25m² - Value 200
Room 30m² - Value 400
Room bigger than 30m² - Value 600
With older stoves a higher value should be set (over
400) so as to avoid excess condensation in the fireplace.
The value of the heating profile is set as follows:
In the main menu, place the cursor on “Heating profile”
Press the right “Select” key.
Adjust the value with the two middle keys
Then press the right “Save” key.
If you would like to quit this menu screen without saving,
press the left “Back” key.
6.5. Description Key lock (child-safe)
1
Menu
Room target/actual: 0/28°C
15:00 We,23.01.2004
Information
Operating mode: Auto
Operating status:Standby
In Info screen 1 you can activate a key lock.
Activating the key lock:
Hold the Menu key down for about 10 seconds
until “Key lock activated” appears on the display.
Deactivating the key lock:
Hold the Menu key down for about 10 seconds
until “Key lock activated” is no longer shown on
the display.
6.6. Description Display brightness - contrast
setting
Left key: Hold key down for about 10 seconds until
“Contrast mode” appears on the display.
Now release the left key and set the desired brightness
or contrast with the two middle keys.
7. Operating the pellet stove
The pellet stove may only be heated by adults. Make
sure that children are never left alone with the pellet
stove. (Do not leave the pellet stove unsupervised for a
long period). The pellet stove may only be used in
accordance with these operating instructions.
Please observe the safety instructions set out in Section
2.
7.1. Fuel
The pellet stove may only be operated with “pellet” fuel.
With this fuel you have chosen CO2-neutral heating for
your home.
Pellets are made from wood waste from sawmills and
planing works and from wood collected from forestry
businesses. These raw materials are therefore of 100%
natural origin and are ground, dried and pressed into
“pellet” fuel without the addition of binding agents.
This fuel is standardised (e.g. DINplus, ÖNorm M 7135,
ENplus-A1.).
Important: Your HAAS+SOHN Pelletto pellet stove may
only be operated with standardised wood pellets with a 6
mm diameter.
1
Back Select
>Language German<
Main menu
Operating mode Auto
Date / Time
1
Back Select
>Heating profile<
Main menu
Date / Time
Language German
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn PELLETTO 432.08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn PELLETTO 432.08 in the language / languages: English as an attachment in your email.

The manual is 3.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn PELLETTO 432.08

Haas-Sohn PELLETTO 432.08 Usermanual and installation guide - German - 34 pages

Haas-Sohn PELLETTO 432.08 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info