812045
23
Zoom out
Zoom in
Previous page
1/32
Next page
GB
19
10.7. Shut down
If a fault occurs, then a shut down is initiated. The components are switched on or off as follows:
Induced draught fan ON and Screw conveyor OFF and Ignition OFF
10.8. Cooling
The end of the shut down process depends on time and temperature.
10.9. Error display - Fault
+++ error +++ The stove can no longer be automatically started up.
The operator can see the fault on the display.
Once the fault has been properly corrected and the error message
on the operator console has been cleared, the stove can be started
up again.
Procedure:
The error is cleared by pressing the "OK" button.
Welcome page is displayed.
26 °C
23 °C
F018
ON/OFF con.
Note
Otherwise please read the information under Faults, causes, correction.
10.10. OFF
11. Overheating protection
A safety temperature limiter (STL) automatically switches the stove off if it overheats. The error F001 is shown
on the console display under operating status. In this case, the appliance must be inspected by a qualified
technician!
12. Power cut
The control unit has a backup battery so that data is retained during a power cut.
A distinction is made between a short power cut and a long power cut.
Short power cut lasts for less than about 30 seconds:
Once the electricity supply has been restored, the stove continues its operation.
Long power cut lasts for more than about 30 seconds:
Once the electricity supply is restored, the stove switches to the Shut down operating status and
subsequently to "OFF".
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn HSP 8 HOME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn HSP 8 HOME in the language / languages: English as an attachment in your email.

The manual is 1.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn HSP 8 HOME

Haas-Sohn HSP 8 HOME User Manual - German - 32 pages

Haas-Sohn HSP 8 HOME User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info