811871
29
Zoom out
Zoom in
Previous page
1/36
Next page
GB
25
E. Flame temperature sensor
defective
F. Downpipe / screw conveyor
blocked
G. Screw motor defective
D. Clean burner - position burner
correctly
E. Flame temperature sensor
defective - contact service
department
F. Clean the intake on the screw
conveyor housing with a vacuum
cleaner - clean burner
G. Screw motor defective -
contact service department
F003 A. Heat exchanger / smoke flues
dirty
B. Heating curve set too low
C. Room temperature sensor is
lying on the floor or wall
A. Cleaning the smoke flues -
clean burner
B. Clean burner - Adjust heating
curve as described
C. Clean burner - suspend room
temperature sensor freely
F005 A. Burner dirty
B. Pellet tank empty
C. Downpipe / screw conveyor
blocked
D. Room too airtight required
combustion air cannot flow into
the room
E. Flue gas temperature sensor
defective
F. Screw motor defective
G. Pellet fuel has too low a
calorific value
A. Clean burner
B. Clean burner - fill pellet tank
C. Clean the intake on the screw
conveyor housing with a vacuum
cleaner. Clean burner
D. Clean burner - Ensure
adequate combustion air
E. Flue gas temperature sensor
defective - contact service
department
F. Screw motor defective - contact
service department
G. Clean burner - switch to high
quality pellet type
F006 A. Combustion chamber door
open during operation
B. Damper in front of the door
contact switch not in the right
position
C. Cable broken in the electric
wiring to the door contact switch
D. The connector has come out
on the door contact switch or on
the central unit
A. Clean burner - close door
B. Clean burner - Adjust damper
in front of the door contact switch
C. Cable broken on door contact
switch - contact service
department
D. Contact service department
F007 A. Flue gas temperature sensor
defective or not connected
A. Contact service department
F008 A. Flue gas temperature sensor
defective
A. Contact service department
F009 A. Note: Combustion chamber
door open during "Off or standby"
A. No correction necessary -
Close door - Error is automatically
cleared
F011 A. Room temperature sensor
defective or not connected
A. Contact service department
F012 A. Room temperature sensor
defective
A. Contact service department
F013 A. The temperature sensor on the
input defective or not connected
A. Contact service department
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn HSP 6 WT RLU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn HSP 6 WT RLU in the language / languages: English as an attachment in your email.

The manual is 1.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn HSP 6 WT RLU

Haas-Sohn HSP 6 WT RLU User Manual - German - 36 pages

Haas-Sohn HSP 6 WT RLU User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info