812035
20
Zoom out
Zoom in
Previous page
1/40
Next page
20
9.4 Electrical ignition
The integrated electrical ignition consists of a
ceramic igniter (see Pictures 12 + 29,30) and
generates the ignition temperature necessary
to kindle the wood pellets. The duration in
which the ignition is activated is dependent on
how fast the waste-gas temperature
necessary is reached, in order to be able to
switch over from the start phase to the
heating operation. The average glow time of
the ignition is 10 to 12 minutes (is dependent
on the wood pellet quality). The start phase is
limited with a maximum time of 20 minutes
and consequently the maximum glow time of
the ignition is also limited with 20 minutes.
Depending on the quality of the fuel, the
development of flames should take place
between 3 minutes and 7 minutes.
Picture 14:
1 = Mains connection
2 = Flue-gas connection piece
3 = Worm motor
4 = Convection air blower with rotational speed
feedback
5 = Ignition
6 = Temperature sensor for waste-gas with
rotational speed feedback
7 = Induced air blower
9.5 Ash tray
The ash tray is designed generously and
enables emptying intervals of up to several
days.
9.6 Convection air blower with rotational
speed feedback
The convection air blower ensures for a faster
heating in the living room.
This switches on automatically from a
predefined waste-gas temperature. The
speed of the convection air blower is adapted
modular to the heating output of the stove,
i.e. great heating output (e.g. 8kW) = high
speed and small heating output (e.g. 2.5 kW )
= low speed of the convection air blower.
Through the rotational speed feedback, a
possible deviation between the target- and
actual operating state can be detected and
corrected accordingly, or with greater
deviations the stove is shut down (Safety
shutdown).
9.7 Controller
The microprocessor controller ensures the
safe and automatic operation of the pellet
stove. The controller regulates the interplay
between the components, such as e.g. air
volume sensor, induced draught blower,
flame-temperature sensor, room temperature
sensor etc.
The electrical fuses of the pellet stove are
integrated in the controller.
To exchange these fuses, the right side panel
must be removed.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn COMPACT-PELLET 309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn COMPACT-PELLET 309 in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn COMPACT-PELLET 309

Haas-Sohn COMPACT-PELLET 309 User Manual - German - 43 pages

Haas-Sohn COMPACT-PELLET 309 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info