564788
20
Zoom out
Zoom in
Previous page
1/34
Next page
20
10.3. GSM Module Setup
10.3..1 Preparing the SIM card for operation with
the GSM module
Before inserting the SIM-card, the security code
for the SIM-card (PIN-code request) must
definitely be deactivated!!
This takes place by operating the SIM-card in
another mobile phone. All security functions must
be deactivated i.e. no security inquiry may appear
when the mobile phone is switched on. Only then
can the SIM-card be used in the GSM-module.
10.3..2 Inserting the SIM card in the GSM module
If one pushes in the button on the module with a
pointed object, the SIM-card holder jumps out of
the module. Withdraw the holder, insert the SIM-
card and reinsert the holder into the opening on
the module.
Picture 20: Inserting SIM-card
10.3..3 Connecting plug-in power unit with GSM
module
The connector of the plug-in power unit is to be
connected to the connection provided on the
GSM-module.
After the plug-in power unit has been connected
to the power network, the lamp on the plug-in
power unit must light up.
The GSM module begins to search for a mobile
radio network. This is signaled by constant
flashing of the LED on the GSM-module in a 2
sec. cycle. If a network has been found and the
module has registered, then the LED only flashes
briefly every 4 sec.
10.3..4 Starting the pellet stove via mobile phone
Overview of the GSM commands (whether the
individual characters are input in upper- or lower
case is irrelevant):
*** telnew06761234567#
Set operator telephone number to 06761234567.
DE: :***baaus
ENG: ***baoff
FRA:. ***baarret
ITA: ***baoff
Set boiler operating mode to OFF.
DE: ***baheiz
ENG: ***baheat
FRA: ***bachauffe
ITA: ***barisc
Set boiler operating mode to HEATING. It is
regulated to the last target room temperature set
in the controller.
***baheiz-rt25#
Set boiler operating mode to HEATING. Target
room temperature is set to 25°C.
***baauto
Set boiler operating mode to AUTO. Heating
according to the set timer program and respective
target temperatures.
***i
An information message is sent to the operator’s
mobile phone.
In addition all faults are sent to the operator’s
mobile phone number. These faults can be
acknowledged with the command
***quit
10.4. Technical Specifications of the GSM Module
Main connection voltage: 230VAC
Mains frequency: 50Hz
Housing dimensions TC35 Terminal:
65 x 74 x 33mm
Bus-interface: RS232 for the connection to a PC
or Laptop
Radio network: Dual band EGSM900/GSM1800
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn CATANIA-RLU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn CATANIA-RLU in the language / languages: English as an attachment in your email.

The manual is 2.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn CATANIA-RLU

Haas-Sohn CATANIA-RLU Usermanual and installation guide - German - 34 pages

Haas-Sohn CATANIA-RLU User Manual - Dutch - 33 pages

Haas-Sohn CATANIA-RLU User Manual - French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info