Manual H.Koenig KM78 (page 9 of 70) (English, German, Dutch, French, Italian, Spanish)

702003

Zoom out

Zoom in

1/70

1. Place the adapter (15c) on the axle of the spiral auger.

2. Insert a sausage attachment (15a or b) into the lock. Attachment is a for thick sausages, attachment b for

thin sausages.

3. Turn the lock “hand tight” on to the spiral housing.

4. Push the sausage skin (using either real or synthetic skin) over the sausage skin and knot the end.

5. Fill the sausage paste on to the filling tray and into the filler neck.

6. Repeat steps 4 to 7 as described in “Operation Meat Mincer”.

7. The sausage mixture is pressed through the sausage attachment and filled into the sausage skin.

8. When the first sausage has reached the desired length, squeeze it together with your fingers at the end of

the sausage top. Turn the sausage around its own axis once or twice.

NOTE:

 Cut Levels 1 to 4 are suitable for mincer operation.

 Do not operate the device for more than 10 minutes and then allow it to cool down for a further 10

minutes.

 You can turn off the device after each single sausage length until you are more experienced.

 Carry out step 8 as described. Then turn on the meat mincer again.

 If you decide to use real skin, let it soak in water for a while before use.

 Take care that the sausage skin is filled „loosely“ as during boiling or frying the sausage expands

and the skin might tear.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig KM78 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig KM78 Manual

Product: