Manual H.Koenig KB15 (page 7 of 44) (English, German, Dutch, French, Italian, Spanish)

674885

Zoom out

Zoom in

1/44

How to cancel the timer

When the unit has been set with the timer or during the timer setting process, press the

TIMER button, then the delay time digit will disappear, mean the timer set has been cancelled.

When the symbol flashs, means the unit need to be cleaned. And if you have cleaned the

unit, always press the TIMER button for more than 5 seconds, this symbol will disappear from

the LCD display window. And the cleaning timer will reset to Zero and reaccount again.

PROBLEM

POSSIBLE CAUSE

SOLUTION

Symbol“ ” flashs.

Lack of Water.

Stop the ice maker, fill water, and

press “ON/OFF” button again to

restart the unit.

Symbol“ ” display in

LCD display window.

There is too much ice.

Remove ice from ice basket.

Ice cubes stick together.

The ice cycle is too long.

Stop the ice maker, and restart it

when the ice blocks melt. Select

the small size ice cube selection.

Water temperature in inner

tank is too low.

Change the water in the inner

Tank. Temperature of water is

better set between 45℉-90℉ .

Ice making cycle is normal

but no ice is made.

Ambient temperature or

water temperature in inner

tank is too high.

Please run the ice maker below

90℉ and pour colder water into

tank.

Refrigerant liquid leakage.

Verify by a qualified technician.

Pipe in the cooling system

is blocked.

Verify by a qualified technician.

TROUBLESHOOTING

CLOCK DISPLAY & THE CORRECT TIME

This unit is supplied with CLOCK dipalying function.

If the displayed time is not correct, you can adjust it to the

correct digit through the CLOCK and SELECT button.

First press the CLOCK button once, the digit meaning hour will

start to flash first, then you can press SELECT button to change

it, each press will increase 1 hour. Press the CLOCK button

again, the digit meaning minute then will start to flash, and also

press the SELECT to change it. Then press the CLOCK the third

time to confirm it, and now it display the new correct clock. And

during adjusting process, after 5 seconds flashing, the digit will

automaticall change to always displaing, also means the new

clock has been set.

Clock

Time

CLEANING REMINDING

My Koenig KB 15 is not making ice? It is about 4 years old and very well maintained and cared for....anyone have any ideas? Submitted on 10-7-2020 at 18:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig KB15 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig KB15 Manual

Product: