674885

H.Koenig KB15 Manual

6
Zoom out
Zoom in
Previous page
1/44
Next page
1. Open the cover, remove the ice basket and pour water into water reservoir.
Keep water level below the level mark.
2. Press “ON/OFF” button on the control panel to turn on the unit to begin the ice making
cycle.
3. Select the size of the ice cube by pressing the “Select” button. Three sizes: SMALL,
MEDIUM or LARGE can be selected:
SMALL
MEDIUM
LARGE
If the room temperature is lower than 60℉, it is recommended to select the small or
medium ice sign button in order to avoid ice sticking together.
4. The ice making cycle lasts 6 to 15 minutes, depending on the size of the ice cube selection
and the ambient temperature. In the extreme hot room temperature, ice-making time
maybe vary a lot.
5. While the icemaker is on, verify water level periodically. If water pump can’t inject water, the
ice maker will stop automatically, and the “ ” symbol will flash in LCD display window.
Fill water up to the level mark and press “ON/OFF” button two times again to turn on the
unit again. Allow the refrigerant liquid inside the compressor at least 3 minutes to settle
before restarting.
6. The ice maker automatically stops working when the ice basket is full and the “ ” symbol
will display in the LCD display widow.
7. Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level.
If unit isn’t in use, drain all water left in the tank.
Timer Delay Time Range: 0.5-19.5 hours.
Default Delay Time: 3 hours.
When the unit is running, you can set the unit with OFF-TIMER to let the unit stop running after
your set delay time.
And when the unit is stopped, you can set the unit with ON-TIMER to let the unit start to run
automatically after your set delay time, then when you go back home or have a dinner, you can
enjoy the happy life that this ice-maker give to you.
How to set the timer
Press the TIMER button first, the default “3.0H” delay time will flash in LCD display window,
then press the SELECT button to select your desired delay time. Each press SELECT button
one time, the flashing delay time will increase 0.5 hour, and if you always press the SELECT
button for mor than 3 seconds, the delay time will chang very quickly. Then after 5 seconds
flashing, the delay time digit will change from flashing to always displaying, means the timer
program has been set.
USING YOUR ICE MAKER
START TO MAKE THE ICE-CUBE
TIMER SETTING
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

h.koenig-kb15

Reset search

  • My Koenig KB 15 is not making ice? It is about 4 years old and very well maintained and cared for....anyone have any ideas? Submitted on 10-7-2020 at 18:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for H.Koenig KB15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig KB15 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info