665712
13
Zoom out
Zoom in
Previous page
1/64
Next page
13/64
Down slope setting (0 to 10 sec)
Time needed to shift from welding current to minimum current. Avoids cracks and craters at the
end of welding.
Post-gas setting (3 to 20 sec)
This parameter determines the length of time in which gas is released after the arc has stopped.
It protects the weld pool and the electrode against oxidization whilst the metal is cooling after
welding.
Advice : Increase the time if the welding seems dark.
(For default setting : 25A=4sec. 50A=8sec. 75A=9sec. 100A=10sec. 125A=11sec.
150A=13sec).
n.b. : At any time, you can check your settings by a simple pressure on the parameter button, without
turning the wheel.
TIG Aluminium welding particularities (AC)
Balance principle
+
-
+
-
+
-
An alternative current is used to weld aluminium and its alloys. During the positive wave, oxidation is
broken (cleaning). During the negative wave, the electrode cools and the parts are welded (penetration).
By modifying the ratio between 2 alternatives through the balance adjustment, you choose either cleaning
or penetration.
Frequency principle
The frequency enables adjustment of the arc concentration.
The higher the frequency, the more concentrated the arc. The
lower the frequency, the wider the arc. In AC mode, the
frequency is manually adjusted. When using AC Easy mode,
this setting is automatically adjusted according to the diameter
of the electrode used and welding current. It is recommended
to use AC in Easy mode.
Functions available according to welding mode
According to welding modes, some buttons do not work, please see table below :
Starting
Trigger
TIG process
HF
TIG Lift 2T 4T 4T log
Pre
-
gas
*
*
Balance
Post-gas
TIG DC / AC
Normal
*
(I)
(only in
4T log)
(only in
AC*)
(only in
AC)
TIG DC / AC
Pulse
*
(I)
(only in
AC*)
(only in
AC)
TIG DC / AC
Easy Pulse
*
(average I)
(only in
AC*)
(only in
AC)
SPOT
(only in DC)
* : In AC Easy mode, frequency and upslope are not accessible. Adjustments are automatic.
Balance : 20% Minimum cleaning
80% Maximum penetration
50%
60% Maximum cleaning
40% minimum penetration
Low frequency
High frequency
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys TIG 207 AC-DC HF FV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys TIG 207 AC-DC HF FV in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info