665712
10
Zoom out
Zoom in
Previous page
1/64
Next page
10/64
DESCRIPTION
Thank you for choosing this GYS machine! To get the most out of your purchase, please read the following
information before using the machine.
The TIG 207FV/208 is a portable, single phase, ventilated Inverter welding unit to be used with non-
consumable electrode (TIG) in direct (DC) or alternative (AC) current. TIG welding requires a gaseous
protection (Argon). In MMA mode, it allows you to weld with any kind of electrodes: rutile, basic, stainless
steel or cast iron. The TIG 208 has an integrated liquid cooling system. The TIG 207FV-208 can be equipped
with a remote control or foot pedal. (This is available separately as an option)They work with a single phase
230V input for the TIG 208, a single phase input spread between 85V to 265V for the TIG 207 FV. They are
protected for a use on electric generators.
POWER SUPPLY STARTING UP
This device is delivered with a plug 16A type CEE7/7. The 208 must be connected to a socket 230V (50-
60Hz) WITH earth. The 207FV integrates a « Flexible Voltage » system and can be used on a
power
supply variable between 85V and 265V (50 60 Hz) WITH earth. The absorbed current (I1eff) is
indicated on the device, for its maximum setting. Check that the power supply and its protection (fuse
and/or circuit breaker) are compatible with the current needed by the machine. In some countries, it may
be necessary to change the plug to allow the use at maximum settings.
The starting up is made by pushing on the standby button .
The device turns into protection mode if the power supply tension is over 265V. To indicate this default,
the screen displays
. Once in protection mode, you have to unplug the device and plug it back on a
socket delivering the correct tension.
Ventilator: in MMA mode, the ventilator operates permanently. In TIG mode, the ventilator only operates
during the welding phase, and then stops after cooling.
These are Class A devices. They are designed to be used in an industrial or professional environment. In a
different environment, it can be difficult to ensure electromagnetic compatibility, due to conducted
disturbances as well as radiation. They comply with the norm IEC 61000-3-12.
WELDING WITH COVERED ELECTRODE (MMA MODE)
Getting Started
Connect the electrode holder and earth clamp to the corresponding sockets.
Ensure that the welding polarities and intensities indicated on the electrode packaging are observed.
Remove the electrode from the electrode holder when the machine is not in use.
Integrated welding assistance
Your device is equipped with 3 specific functions :
Hot Start gives an adjustable* overcurrent at the beginning of welding.
Arc Force delivers an overcurrent which avoids sticking when the electrode enters the welding pool.
Anti-Sticking allows easy removal of the electrode in case of sticking.
Selection of process and current setting
1- Select MMA mode
2- Select the wanted current thanks to the potentiometer.
Adjustable* Hot Start
The Hot Start is adjustable (between 0 and 60%) within the limit of 160A.
1- Press and hold the “Hot Start” button.
2- Select the required setting.
N.B. : the display "HI" indicates that the Hot Start is at maximum.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys TIG 207 AC-DC HF FV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys TIG 207 AC-DC HF FV in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info