665726
13
Zoom out
Zoom in
Previous page
1/48
Next page
13
PROGYS 180A
MADE IN FRANCE
EN
MMA WELDING (ELECTRODE)
• Apply the usual welding rules.
• Leave the machine connected to the power supply after welding in order to let it cool down.
• Thermal protection : in case of over-heating the thermal protection light turns on. The cooling time is about 2 to 5 min
according to external temperature.
Advice :
• Respect welding polarities and currents indicated on the electrode packaging.
• Remove the electrode from the electrode holder when you do not use it.
• Leave the ventilation grill free to allow in/out air circulation.
TIG WELDING WITH INERT GAS
These machines can weld DC TIG with scratch start (100/130/180)
TROUBLESHOOTING
Symptoms Causes Remedies
The 2 indicators are on, the machine does not
deliver any current.
The thermal protection has switched on. Wait for the end of the cooling cycle.
The green indicator is on, but the machine
does not weld.
Fault with earth clamp/cable connection. Check the connections
The product is under voltage, you are feeling
tingling when touching the machine's body.
The earth contact is faulty. Check the plug and the earth of your installa-
tion.
The machine welds poorly. Polarity error (+/-). Check the polarity (+/-) recommended on the
electrode box.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys PROGYS 180A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys PROGYS 180A in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info