Connect the USB plug (not supplied) to the USB socket and press the power button (1) to acti-
vate the unit to start charging your electronic device (mobile or tablet).
BATTERY SWITCHING FUNCTION (OBD CABLE NOT SUPPLIED, REF. 054202)
Before each use, please check that all the vehicle’s systems are off (lights, ventilation, onboard computer) :
1- Check that the product’s internal battery is charged (see p.6)
2- Connect the cable with the OBD connector (not supplied, ref. 054202) to the vehicle and connect the other end to the cigarette lighter socket on the NOMAD
POWER (6).
3- Press the “ON/OFF” button, all the LEDs will light up succesively and the NOMAD POWER PRO will start to supply power to the vehicle’s systems.
4- Disconnect the vehicle’s battery and put the terminals on a non conducting element.
5- Once the battery is reconnected to the vehicle, disconnect the OBD plug.
6- Recharge the product after each use.
12V POWER SUPPLY - THROUGH THE CIGARETTE LIGHTER SOCKET (CABLE NOT SUPPLIED)
This product can sustain a 12V power supply through the cigarette lighter socket:
1- Check that the product’s internal battery is charged (see p.6)
2- Check that the equipment you wish to connect to the NOMAD POWER is off then connect the cigarette lighter plug (not supplied) between the NOMAD POWER
and the equipment.
3- Press the “ON/OFF” button, all the LEDs will light up succesively and the NOMAD POWER PRO will start to supply power to your equipment
4- Swith off the equipment once you are done and disconnect the cigarette lighter plug (not supplied) from the NOMAD POWER.
6- Recharge the product after each use.
FLASHLIGHT FUNCTION
When power is on, press the button to turn on the LED.
Briey press the button to switch lighting modes (4 available modes: normal, ash, SOS and
OFF).
PROTECTIONS
This device is protected against short-circuits, polarity reversals and use under non-recommended temperatures (reminder: optimum working condition -20°C / +40
°C).
TROUBLESHOOTING, CAUSES, REMEDIES
TROUBLESHOOTINGCAUSESREMEDIES
1
No response while pressing the ON/
OFF button
The NOMAD POWER PRO is discharged.Charge the product (see page 6).
2Impossible to start the vehicule.
Vehicle battery level is too low.Force the start (see step 6b).
Vehicle battery is out of order.Change the vehicle battery
"Engine size is too big
- Petrol engine : 6000 cm3 max
- Diesel engine : 3500 cm3 max"
-
Short-circuitCheck that the clamps are connected properly (see step 4).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Gys NOMAD POWER PRO 90 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Gys NOMAD POWER PRO 90 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 3,17 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
