625747
25
Zoom out
Zoom in
Previous page
1/32
Next page
25
NEOSTART 320 / 420 / 620
CN
25
建议与警告
0 警告!内含易爆气体,请远离火苗和火花。充电期间,电池应当放置于通风良好的地方。
0 防止充电器遭淋雨及避免潮湿环境。
0 如果电源线损坏,以防危险,必须由工厂、售后服务部或者一名有类似资质的人员进行更换。
0 外部熔断器的熔丝替换以及断路开关的重置可由用户自行完成。
0 无论如何不得用该充电器对干电池或不可充电电池进行充电。
0 必须严格遵照指导说明中的连接顺序进行连接。
0 对于有选择性回收的产品,请勿扔至家用垃圾桶中。
0 该设备不适合以下人群使用:行为、感观或精神能力有缺陷者,或缺乏使用知识或经验者。除非有第三者在场愿意对
其人身安全负责的前提下,对其进行监督及事先进行相关设备的使用指导后才可让其使用。
0 请勿拆开充电器设备。任何未经原生产厂商技术人员进行的设备改动都将导致保修期限的取消。
0 确保现场可用电压与电池充电器警示铭牌上标注的相符。
故障原因及解决方案
故障 原因 解决方案
充电器的电流表指针不发生偏移
(无动作)
区域电源电压问题
检查您所在区域的电源电压。
检查充电器是否在充电档。
夹钳短路或
正负极发生反向错误
检查熔丝是否熔断
断路开关是否已按下
待充电电池已损坏
用电压表检测接线柱间的电压。
如果测得的每组电池的电压值瞬
达到2.5V以上,电池则可能已经
发生硫化或损坏。
电压错误(12-24V) 检查旋扭处于正确的档位(12或24V)
高强度使用后,充电器发生
过热中断保护
等待15分钟让设备冷却
旋扭设定在最小值时,
电流表指针超过20A
电池严重放电 保持在最小设定值下充电。
电压错误(12-24V) 检查旋扭处于正确的档位(12或24V)
蓄电池有短路的电池组 更换电池组
设备断路开关起跳
您可能将充电器调节在<charge>
充电档时进行过起动操作。
必须将旋扭调到
《START》起动档否则可能会
引起设备损坏。
重新按下断路器开关。
您可能用24V的档位
对12V的电池充电.
将旋扭调至12V档位。
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys NEOSTART 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys NEOSTART 620 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info