625747
6
Zoom out
Zoom in
Previous page
1/32
Next page
6
NEOSTART 320 / 420 / 620
EN
This user manual includes information to operate your device and precautions for your safety. To get the best of your
equipment please read carefully before use.
GENERAL DESCRIPTION
NEOSTART devices are designed for charging and starting 12V (6 element) and 24V (12 element) lead acid batteries
(electrolyte):
Charging Starting
Neostart 320 40 - 400 Ah 35 - 120 Ah
Neostart 420 25 - 600 Ah 35 - 160 Ah
Neostart 620 45 - 900 Ah 45 - 200 Ah
Assembly - handle and wheels (only for NEOSTART 420 and 620) :
POWER SUPPLY
Check that the power and protection (fuse and / or circuit breaker) are compatible with the current required. The
appliance must be positioned so that the plug socket is accessible.
They must be connected to a single phase 230V socket with EARTH protected by a 16A circuit breaker.
CONNECTION AND DISCONNECTION
IMPORTANT! Before connecting to a battery, check that the device is not connected to the power supply and the switch
is OFF (if any).
Secondly, check the polarity of your battery.
Warning: The cables must not be pinched or in contact with hot or sharp surfaces
Starting and Charging a battery connected on the vehicle:
Where the negative pole of the battery is connected to the vehicle chassis
• Connect the red clamp to the positive pole of the battery.
• Connect the black clamp to the vehicle chassis, ensure it is not close to fuel lines and the battery.
• Connect the device to the mains.
After use, turn the switch to OFF (if any), then disconnect the charger from the mains supply then disconnect the black
clamp and nally the red clamp.
Some vehicles have the positive pole of the battery connected to the chassis, in this case:
• Connect the black clamp to the negative terminal of the battery.
• Connect the red clamp to the vehicle chassis, ensure it is not close to fuel lines and battery.
• Connect the device to the mains.
• After use, turn the switch to OFF (if any), then disconnect the charger from the mains supply then disconnect the red
clamp and nally the black clamp.
Charging a battery not connected to the vehicle:
Connect the red clamp to the positive battery terminal and then the black clamp to the negative terminal of the battery.
• After use, turn the switch to OFF (if any), then disconnect the charger from the mains supply then disconnect the red
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys NEOSTART 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys NEOSTART 620 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info