665823
24
Zoom out
Zoom in
Previous page
1/50
Next page
24
NEOPULSE 270-T1 / 270-T2 / 300
EN
ONLY FOR THE NEOPULSE 270-T2
The Spool Gun torch is connected to the connector (7). This torch can be
used only in synergic, standard and manual mode.
- In manual mode (see p.20), the knob to adjust the wire speed is on the
torch (adjustment cannot be done on the machine).
- In synergic mode (see p.20), the adjusting knob enables to amend the
wire speed between 50% to 100% of the interface value.
The detection of the Push-Pull torch is made by a simple press on the trig-
ger. Make sure to adjust the max speed wanted with the dial on the inter-
face.
Spool Gun torch (OPTION)
Procedure of reel assembly on
Spool Gun torch
4
5
1 2
3
1- Button opening/closing casing
2- Reel tightening nut
3- Reel break nut (do not tighten too much)
4- Adjsutment screw for rollers tension
5- Adjustment knob for speed wire
- Open the case (1), remove the support nut (2).
- Untighten the reel brake nut (3).
- Insert your reel.
- To insert the wire in the rollers, put a tension on the «adjustment screw for rollers
tension (4)»
- Remove the torch wire by reeling the reel.
- Plug in the Spool gun command connector and power connector (see p.2).
RESET
The NEOPULSE has 2 reset options. The « SOFT » option resets the machine
completely but stores the settings saved in memory. The « TOTAL » option
reset the machine perameters to those when purchased (For this mode an SD
card is needed).
Save:
To save a welding program you need to enter a number and a name. (7
letters) In the event of use with several torches, select the torch used before
getting back the memory.
SD card with version V1005 allows using synergic welding for the material and diameters in the chart below:
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys NEOPULSE 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys NEOPULSE 300 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info