665819

Gys MAGYS 500 GR Manual

16
Zoom out
Zoom in
Previous page
1/62
Next page
16
MAGYS 400-4 / 400 GR / 500 GR / 500 WS
EN
SAFETY
Arc welding can be dangerous and can cause serious and even fatal injuries.
Protect yourself and others. Ensure the following safety precautions are taken:
Handling
Unplug the unit, check if the chains of the gas bottle are fastened enough, don’t ride over the
wires and cables. In compliance with the EN60974-1 standard, don’t tilt the unit more than 15°
when you move or set up the welding unit.
Lifting
• Systematically remove the gas bottle. Do not lift the unit with any other charge.
• Use simultaneously the four ring eyes being sure that the weight is well distributed and the
angle between the strap and the machine is at a minimum of 60°. Do not lift the welding unit
with the handles.
• Use only the link chains or straps with the correct size and the same width. The hooks need to be
locked in compliance with the standard DIN 82101, shape A, minimum size 0.4. The weight with
equipment of the MAGYS 400-4S is around 160kg, the MAGYS 400 GR equipped weighs around
210 kg and around 220kg for the MAGYS 500 GR/500 WS.
Fuses (x2)
The low voltage circuit of the unit is pro-
tected by 2 fuses (T2A) located on the
circuit board of the generator.
Arc radiation: Protect yourself with a helmet tted with lters in compliance with EN169 or EN 379
Rain, steam, damp
Use your welding unit in a clean/dry environment (pollution factor ≤ 3), on a at surface, and
more than one meter from the welding work-piece. Do not use in rain or snow.
Electrical shock:
This device must only be used with an earthed power supply. Do not touch the parts under high
voltage. Check that the power supply is suitable for this unit
Falls: Do not place/carry the unit over people or objects.
Burns: Wear protective (re-proof) clothing (cotton, overalls or jeans).
Fire risks: Remove all ammable products from the work area. Do not work in presence of ammable gases
Fumes:
Do not inhale welding gases and fumes. Use the device in a well ventilated environment, with
articial extraction if welding indoors.
Additional precautions:
Avoid any welding operation undertaken in:
• rooms where there is an increased risk of electric shocks,
• Poorly ventilated rooms,
• In the presence of ammable or explosive material,
Use should always be approved by a «responsible expert», and made in presence of people trai-
ned to intervene in case of emergency.
Technical protection as described in the Technical Specication CEI/IEC 62081 must be imple-
mented. Welding in raised positions should not be undertaken, except in case of safety platforms
use.
People wearing Pacemakers are advised to see their doctor before using this device.
Do not use the welding unit to unfreeze pipes.
Handle gas bottles with care - there is increased danger if the bottle or its valve are damaged.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys MAGYS 500 GR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys MAGYS 500 GR in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info