665724
15
Zoom out
Zoom in
Previous page
1/56
Next page
15
GYSMI E160
MADE IN FRANCE
EN
TROUBLESHOOTING
Symptoms Causes Remedies
MMA-TIG
The machine does not deliver any
current and the yellow thermal
protection indicator is switched on
(6).
The thermal protection has swit-
ched on.
Wait the end of the cooling cycle,
about 2 min. The indicator (6)
switches off.
The indicator is on but the product
does not deliver any current.
The earth clamp or the electrode
holder is not conencted to the unit.
Check the connections
The product is connected to the
mains, you are feeling tingling
when touching the case.
The earth contact is faulty.
Check the plug and the earth of
your installation.
The machine welds poorly. Polarity error
Check the polarity (+/-) recom-
mended on the electrode box.
When the machine starts, the
display shows
.
The power supply voltage is not
suitable (100V-240 V AC)
Check the power supply network
or the generator
TIG
Unstable arc
Fault due to the tungsten electrode
Use an electrode size more sui-
table to the thickness of your
metal.
Use an tungsten electrode properly
prepared.
Gas ow too high Reduce the gas ow
The tungsten becomes oxidized
and dull at the end of the welding
Welding area.
Check and tighten every gas
connection. Wait for the electrode
to cool down before switching off
the glas ow.
Gas problem, or gas ow stops too
early
Check that the earth is connected
to the +
The electrode melts Polarity error
Check that the earth is connected
to the +
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSMI E160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSMI E160 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info