665724

Gys GYSMI E160 Manual

14
Zoom out
Zoom in
Previous page
1/56
Next page
14
GYSMI E160
MADE IN FRANCE
EN
Activating the MMA mode and setting the intensity :
- Select the MMA mode (2) using the switch (5)
- Set the desired dintensity (display(1)) using the (4) keys.
E160
HOT START 0 > 60%
ARC FORCE -
Recommendations :
Low Hot start, for thin sheets– High Hot start for difcult metals (dirty or oxydised)
To set the Hot Start, follow these steps :
Press the switch (5) for 3 seconds.
«HS» (Hot Start) blinks and a number is displayed.
Set the desired percentage (display (1)) using the (4) keys.
Validate by pressing the switch (5).
TIG WELDING WITH INERT GAS (TIG MODE)
TIG welding requires gas shield protection of pure gas (Argon).
To do TIG welding, follow these steps :
1. Connect the earth clamp to the positive connector (+).
2. Connect a valve torch to the negative connector (–).
3. Connect the torch’s gas hose to the gas bottle’s regulator
It may be necessary to cut it before the bolt if the latter does not match the regulator.
4. Select the TIG mode (3) with the switch (5).
5. Set the desired intensity (display(1)) using the (4) keys, according to the thickness
of the metal sheet (30A/mm).
6. Set the gas ow on the gas bottle’s regulator then open the torch’s valve.
7. To start the arc : make contact between the electrode and the workpiece.
8. Once done wit the workpiece : quickly lift the torch, stop the gas ow after the
electrode has cooled down.
Recommended combinations / electrode grinding
Current (A)
Ø Electrode (mm)
= Ø wire
(ller metal)
Ø Shroud
(mm)
Flow
(Argon l/mn)
0,5-5 10-130 1,6 9,8 6-7
4-7 130-190 2,4 11 7-8
To optimise the welding process, it is recommended to grind the electrode prior to the welding, as described below:
L = 2,5 x d.
L
d
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSMI E160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSMI E160 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info