625737

Gys GYSFLASH 40-12 FV Manual

10
Zoom out
Zoom in
Previous page
1/52
Next page
10
GYSFLASH 40-12 FV
This manual contains safety and operating instructions. Read it carefully before using the device for the rst time and keep it in a
safe place for future reference.
GENERAL DESCRIPTION
The GYSFLASH 40-12 FV provides a high powered stabilised power supply incorporating SMPS (Switch Mode Power Supply) tech-
nology. Designed to sustain 12V battery (liquid/AGM/gel) for vehicles during diagnostic work. This device will also ensure an ideal
charging cycle for battery maintenance for the most modern vehicles and battery types. It can be tted with cables up to 2x5m in
16mm².
Changing charging cables
requires recalibration (see page 14). It is considered a xed device not a mobile product.
These devices have 5 modes including 2 that are hidden:
• Charge Mode: to charge liquid or gel electrolyte batteries (lead, lead Calcium, lead Calcium-silver, AGM...) from 10 Ah to 500 Ah
in 12V.
•
Supply mode « Diag + »:
GYSFLASH supply up to 40A to ensure compensation of current used by high-energy consumers (engine
fan, window regulator, electronic suspension, etc). In this mode the voltage can be precisely adjusted.
•
Supply mode « Showroom »:
ensure current compensation when using electrical features of a demonstration vehicle (window
regulator, heating, morrors, etc) enabling permanent display of the vehicle. In this mode the voltage can be precisely adjusted.
•
« Change battery » mode:
ensures a stabilised power supply to the vehicle during battery replacement to preserve memory
settings. By default this mode is inactive and doesn’t appear in the mode list.
•
« Power Supply » mode:
This mode is intented for experimented user only. By default this mode is inactive and doesn't appear
in the mode list. This mode enables to use the charger as a powerful stabilised power supply with regulated voltage and adjustable
maximum current.
This device has an automatic restart feature enabling in Charge, Showroom and Power Supply modes to automatically restart the device
in case of power cut.
The function «Lock Showroom», if activated, restricts the device to Showroom Mode only, to facilitate its use
for vehicles demonstrators.
START UP
1
Connect the charger to the mains. With «Flexible Voltage» technology, this battery charger works on any
voltage in the range 85V to 265V (50/60Hz).
2
Turn the switch to «ON».
Within 3s the display will show «GYSFLASH 40-12 FV Vx.x»
3
Select the required mode. By default the charger will automatically select the last setting.
• The "Mode" key enables access to several menus :
MODE
Charge > Diag+ > Showroom (>Change Battery*)
(> Power Supply*)
*hidden by default.
• To access the "conguration" menu press the "mode" key
for 3s :
MODE
3 sec - Conguration
CHARGE MODE
This product will charge the battery safely even if the battery is still in the vehicle.
Ensure that the correct sequences are followed.
Charge conguration :
Before starting to charge the battery, ensure that the charger has been correctly set (battery voltage, charging curve and battery
capacity).
Several charging curves are available :
• Easy: simplied curve, suitable for every lead battery and which for it is not required to know the battery capacity. However for an
optimized charge, it is recommended when possible to use the liquid or gel/AGM batteries charging curves.
• Liquid: charging curve for vented battery (lead, lead calcium, lead calcium-silver, etc). For this charging curve the battery capacity
in Ah must be selected.
• Gel/AGM: charging curve for sealed battery (gel, maintenance free, AGM…). For this charging curve the battery capacity in Ah must
be selected.
• Expert: charging curve type IU
O
I
O
U adjustable via the menu Expert conguration and intented for experimented user (see page 15).
By default this curve is inactive and doesn't appear in the curve list of the CHARGE mode.
WARNING: According to the conguration of the expert curve (see page 15), it can be necessary to disconnect vehicle’s battery
before starting the charge in order to protect the electronic of the vehicle.
EN
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSFLASH 40-12 FV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSFLASH 40-12 FV in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info